Husqvarna 564xp (g) fuel inject

[lehman live edge slab]

wedges in action by a guy in my area.

Even using a ms 400.1 looks like, 11 1/2 minute mark roughly throws saw, I’m sure it wasn’t far but the camera angle sure made it look rougher than it probably was

 

[jurchybald]

I made a few cuts today. Feels like husky. Took the cover off. Cylinder is extra low. No transfer caps. Strangely small air filter. So short stroke big bore. Not usual for husqvarna

 

[lehman live edge slab]

I made a few cuts today. Feels like husky. Took the cover off. Cylinder is extra low. No transfer caps. Strangely small air filter. So short stroke big bore. Not usual for

But the question on everyone on YouTubes mind is it fuel efficient?

 

[Loggernate]

I made a few cuts today. Feels like husky. Took the cover off. Cylinder is extra low. No transfer caps. Strangely small air filter. So short stroke big bore. Not usual for husqvarna

From the pictures it looks like the air filter is bigger than what the 562 has?

 

[jurchybald]

From the pictures it looks like the air filter is bigger than what the 562 has?

I think it's smaller but not sure.

 

[HumBurner]

I'm liking the increased chain speed (per Husqvarna's US website specs) over the 562. It's not much, but in critical situations it all matters.

Time will tell.

Edit: I must've looked at the specs backwards, as the 564 is a hair slower, not faster.

 

[oddsaws]

But the question on everyone on YouTubes mind is it fuel efficient?

I just want to know if it’s going to reduce my carbon footprint

 

[bwalker]

I'm liking the increased chain speed (per Husqvarna's US website specs) over the 562. It's not much, but in critical situations it all matters.

Time will tell.

Edit: I must've looked at the specs backwards, as the 564 is a hair slower, not faster.

Thats a fairly meaningless spec.
Ita chain speed under load that counts.

 

[HumBurner]

Ita chain speed under load that counts.

Agreed