WANTED Husqvarna 394 parts needed

[Cliffdropper]

I'm looking for some parts to get my 394 back up and running again. I need the left handle insert and cable (dont remember their being a cable in there, but parts diagram shows it). The air conductor, and the manifold that connects the carb to the head. Haven't had any luck finding these on the line. Any insight would be greatly appreciated. Cheers

 

[Dennisthemenace]

All are available from the Husq dealer. In Australia anyway

 

[Ketchup]

The throttle cable and air conductor interchange with 395. The handle caps can be hard to track down and are surprisingly expensive. The intake block may be available from Husqvarna in the US, but be prepared to wait for it.

 

[jacob j.]

The throttle cables for the 394 and 395 are not the same. They're different lengths and the 394 throttle cable ferrule is captured at the bottom of the airbox. The 395 cable does not have a ferrule and is captured at the intake flange like the 372/390.

 

[Ketchup]

The throttle cables for the 394 and 395 are not the same. They're different lengths and the 394 throttle cable ferrule is captured at the bottom of the airbox. The 395 cable does not have a ferrule and is captured at the intake flange like the 372/390.

That’s interesting. I guess my 394 is more modified than I realized. Sorry for the misinformation.

 

[Squareground3691]

The throttle cables for the 394 and 395 are not the same. They're different lengths and the 394 throttle cable ferrule is captured at the bottom of the airbox. The 395 cable does not have a ferrule and is captured at the intake flange like the 372/390.

Good info, JJ

 

[jacob j.]

That’s interesting. I guess my 394 is more modified than I realized. Sorry for the misinformation.

Unfortunately there's eBay sellers marketing re-pop cables for both. The Duke™® @Duke Thieroff has true re-pop 394 cables.

 

[Squareground3691]

I'm looking for some parts to get my 394 back up and running again. I need the left handle insert and cable (dont remember their being a cable in there, but parts diagram shows it). The air conductor, and the manifold that connects the carb to the head. Haven't had any luck finding these on the line. Any insight would be greatly appreciated. Cheers

THE DUKE'S THROTTLE CABLE FITS HUSQVARNA 394 394XP 503520402

QUALITY AFTERMARKET CABLE HAS PROPER FERRULE FOR 394XP CHAINSAWS, OTHERS ADVERTISED ARE INCORRECT FOR THE APPLICATION

www.sawsalvage.co

https://www.sawsalvage.co/products/genuine-husqvarna-intake-manifold-block-fits-394xp-503471201