how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Semotony]

They finance the old magnesium. [emoji106]

As long as there is Stihl snobs.

029 all back together and run in some. [emoji6]. Chain is a POS and no other .063” x 3/8” on the pegboard. Not worth even trying to sharpen. [emoji57]

I've got a 32" like that which hung on the peg til the Simmington was here and that length fit the bill. Lil touch up on the grinder once inna while & should get beyond the maple tree branches that are being milled.

 

[67L36Driver]

Das boot!
Person driving SUV in Atchison had to be rescued during flood
https://www.kctv5.com/news/person-d...cle_e1c215d2-57ea-11e9-b176-bbcf3e6013f4.html
(Via KCTV5)

Arrogant Benz driver. [emoji57]

 

[Hedgerow]

Lots of life left in that.

Semi chisel...

By the time the edges are proper and sharp, it’ll still cut like *s-word..

Good one to send out with a saw.. Lol..

 

[67L36Driver]

Semi chisel...

By the time the edges are proper and sharp, it’ll still cut like *s-word..

Good one to send out with a saw.. Lol..

By the time I’d get it past the damage on the left cutters, it will be back to the witness mark.

A 3/8” x .050” x 72 dL from Jeff is $18.39. A 60dl is $15.40.

So not worth my time.

 

[67L36Driver]

Borrowed the 16” off the 032 again.

There is some blocks down on Saxton Road we can butcher on. [emoji108]

Get some run time on the 029.

Morning midlanders!

 

[sawnami]

Good morning!
Been searching for a box of Mantis tiller parts for three days to no avail. Found a lot of other stuff though.[emoji849] Got a couple big Shindawa trimmer engines that I may try to adapt to one if I don't find those parts soon.[emoji2955]. Maybe turn it into a drag racing tiller. [emoji39]

Sent from my SM-N950U using Tapatalk

 

[Jetmd]

Good morning Steve!

Hope everyone has a safe and productive Saturday.

Looks to be a beautiful day in Thunderdome.

 

[Workshop]

Morning everybody.
Heading east today.
Got me a hankerin for some pizza.

 

[JimBear]

Good morning!
Been searching for a box of Mantis tiller parts for three days to no avail. Found a lot of other stuff though.[emoji849] Got a couple big Shindawa trimmer engines that I may try to adapt to one if I don't find those parts soon.[emoji2955]. Maybe turn it into a drag racing tiller. [emoji39]

Sent from my SM-N950U using Tapatalk

I will look this evening when I get home, my mother had one she was wanting to get rid of.

 

[67L36Driver]

Stihl waiting on the Farmertec 362 top end. Wasted three days in customs. [emoji57]

72cc evilbay saw shows shipped but no proof of life from the tracking.

012 carcass shows promise even though the fuel tank stunk up the garage. [emoji1785]

 

[67L36Driver]

The 029.

Sun burned he is.

Set up for noodling.

The OEM carb came with limiters. [emoji13]
Performance is mediocre at best.

 

[Hedgerow]

The 029.

Sun burned he is.

Set up for noodling.

The OEM carb came with limiters. [emoji13]
Performance is mediocre at best.

That the chicom P&C Carl?

 

[67L36Driver]

That the chicom P&C Carl?

As supplied by Jeff, Stens. Box marked made in China.

Misc. other parts to make him complete were, for the most part, from Jack Horners carcass deposit and my ‘save it for later’ stash. [emoji2960]

No chain brake on it.

 

[Hedgerow]

Those Chinese kits work, but I’ve used 2 thus far, and the performance is just not up to par.

An 029 super, even tired, will out run the 64cc Chinese offering easily..

 

[Hedgerow]

But , start, run and cut, is up to par for some folks, so I guess they have their place.

 

[Hedgerow]

 

[Dub11]

View attachment 175534

Oh my,

Gasser?

 

[moparnut88]

Got my concrete forms layed dwn this afternoon for my new air compressor just gotta drill some holes into the existing pad to attach them. Maybe get it poured next week.

Sent from my SM-N950U using Tapatalk

 

[Hedgerow]

Oh my,

Gasser?

Indeed...
6.2 L

 

[Hedgerow]