how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Dustin]

The old barker is all back together and running good

Sent from my SM-G935T using Tapatalk

 

[Hinerman]

What size file to use on a 7/16 pitch chain? Thank you.

Sent from my SM-G935T using Tapatalk

Same as 3/8 should work 13/64 sound right.

I think 7/32 or 1/4 would be better IMO. 1/4 files are a little harder to come by.

http://www.baileysonline.com/Chains.../Pferd-1-4-Regular-Cut-Round-Files-6-Pack.axd

@Philbert needs to chime in for his expert opinion.

 

[Dustin]

I think 7/32 or 1/4 would be better IMO. 1/4 files are a little harder to come by.

http://www.baileysonline.com/Chains.../Pferd-1-4-Regular-Cut-Round-Files-6-Pack.axd

@Philbert needs to chime in for his expert opinion.

I have a 7/32 file and seems to match up good.this chain not got a whole lot of life in it but it's all I got. Would like to find a better on but not much luck.thanks

Sent from my SM-G935T using Tapatalk

 

[cobey]

Clean looking old devil.[emoji106]

Cassette player?

Quite a long time ago my cousin's boys in Michigan had an old trade in Buick Skylark 4 dr from the local dealer. Pulled out the small block and dropped in a 455. Made one heck of a sleeper. Made quite a bit of cash street racing until the word got around Saginaw and Bay City.

Am/fm radio

 

[WKEND LUMBERJAK]

I think 7/32 or 1/4 would be better IMO. 1/4 files are a little harder to come by.

http://www.baileysonline.com/Chains.../Pferd-1-4-Regular-Cut-Round-Files-6-Pack.axd

@Philbert needs to chime in for his expert opinion.

Yes 7/32would be better. I had a brain fart. Sometimes very foul.

 

[Dustin]

So how to set metering lever on a walbro hdc 44 carb?

Sent from my SM-G935T using Tapatalk

 

[lumberjackchef]

So how to set metering lever on a walbro hdc 44 carb?

Sent from my SM-G935T using Tapatalk

I believe on those you use a straight edge across the base IIRC....anyone else remember if that's correct?

Sent from my Moto G Play using Tapatalk

 

[lumberjackchef]

http://www.walbro.com/service-manuals/here is a link to the PDF manuals online didn't have time to look it up.....

Sent from my Moto G Play using Tapatalk

 

[Dustin]

I believe on those you use a straight edge across the base IIRC....anyone else remember if that's correct?

Sent from my Moto G Play using Tapatalk

That's what someone else said so that's what I did and the homelite e-z is running good now . Thanks

Sent from my SM-G935T using Tapatalk

 

[sawnami]

I have a 7/32 file and seems to match up good.this chain not got a whole lot of life in it but it's all I got. Would like to find a better on but not much luck.thanks

Sent from my SM-G935T using Tapatalk

Sent from my SM-N910V using Tapatalk

 

[Locust Cutter]

Sent from my SM-N910V using Tapatalk

Seems that .404 and actual 3/8 have more in common than I was lead to believe... Funny that 13/64" isn't mentioned...

 

[Homelite410]

Evening fellas. Been working on the chicken coop and I think I have a coon proof chicken door. It will be operated by rope from outside the pen.

 

[Dustin]

Trying to figure out what model motor this is and maybe get a piston rod for it maybe a part #.
Sears
Model # 917-350711
Serial # 8484
Engine tag number
T-1486
5324382
Thanks.

Sent from my SM-G935T using Tapatalk

 

[67L36Driver]

I believe on those you use a straight edge across the base IIRC....anyone else remember if that's correct?

Sent from my Moto G Play using Tapatalk

Yup, straight edge, just up to it.

 

[sawnami]

Trying to figure out what model motor this is and maybe get a piston rod for it maybe a part #.
Sears
Model # 917-350711
Serial # 8484
Engine tag number
T-1486
5324382
Thanks.

Sent from my SM-G935T using Tapatalk

It's in the AH-51 number range.

Sent from my SM-T900 using Tapatalk

 

[WKEND LUMBERJAK]

Good morning.

 

[Workshop]

Morning everybody.

 

[sawnami]

Morning. Been a little damp outside.

Sent from my SM-N910V using Tapatalk

 

[67L36Driver]

Morning midlanders!

More rain.[emoji37]

Found the problem with the 335xpt. Split fuel line. Hidden it was.[emoji35]

 

[Hinerman]

Good Morning middle America. Lots of rain here too. Have a good one.