how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Ethan Hamby]

Simple way to make it where I don't have to screw the nuts down 2 inches of thread

 

[Locust Cutter]

Evening all! Scored some tickets on base to a concert my Wife wants to go to. I can't stand the guy, but Happy Wife...
I did get a big pile of wood stacked and am about to start swapping out some decrepit pallets for good ones, so I can continue the work on the tree row across the road. Hope to spend Thursday cutting over there and splitting at a steady pace. I figure I'll cut until the saw runs dry, set it down to let it cool and start splitting and throwing into the truck. Won't be Slow but won't be fast either, maybe halffast...

There is a 3120 for sale in my neck of the woods which is taunting me, but I need a 28"-50" mower worse right now... I'll get a 6 cube someday, but no more than I really need the 9010 right now, it can wait.

I do need to order some seals for the Kids Yamaha DT85 to get it up and burbling... Should be fun to see them riding around and developing an affliction for the ring-a-ding-ding-ding sound!

 

[Dub11]

Simple way to make it where I don't have to screw the nuts down 2 inches of thread

Keep the pics coming Ethan so I can learn.

 

[Ethan Hamby]

I wonder if the tape will seal like I think it will... Lol. It should be enough to hold a few psi for a pressure test. Muffler side I'll probably cut a piece of aluminum plate and put some inner tube on the back

 

[Ethan Hamby]

If I had used a plate on the intake side instead of the carb body it would have had sooooo many threads before it was tight lol

 

[Dub11]

I was thinking of using the soap water trick around seals just to help.

 

[Ethan Hamby]

I don't even think it has a crankcase leak because I saw the carb visibly dumping fuel randomly when the saw was off lol but I'm going to test it just because y'all keep saying to

 

[Ethan Hamby]

Plus I needed something to do while I'm waiting on my new carb... Hopefully it gets here before I leave for Academy Monday

 

[Dub11]

Plus I needed something to do while I'm waiting on my new carb... Hopefully it gets here before I leave for Academy Monday

Academy?

 

[Ethan Hamby]

I have 5 weeks of Academy training starting Monday for the prison. I'll be gone from home all week and come home on the weekends. Delivery on the carb says Saturday so hopefully it really gets here then

 

[67L36Driver]

Morning midlanders!

Too cold for geezers that want to test run the Shindaiwa.

 

[MG2186]

Morning all


Sent from my iPhone using Tapatalk

 

[SteveSS]

I wonder if the tape will seal like I think it will... Lol. It should be enough to hold a few psi for a pressure test. Muffler side I'll probably cut a piece of aluminum plate and put some inner tube on the back

If you buy these, you'll save yourself a lot of trouble. And the seller is a member of our forum. Great guy. @Definitive Dave

http://www.ebay.com/itm/Stihl-Chain...251715?hash=item33a64acb83:g:zgkAAOSw9N1VruNt

 

[SteveSS]

Morning folks. Durn temp dropped again.

 

[WKEND LUMBERJAK]

yes it cooled of

 

[67L36Driver]

Who is the evilbay seller in Greencastle, Mo?

 

[Workshop]

Morning everybody.

 

[sawnami]

I wonder if the tape will seal like I think it will... Lol. It should be enough to hold a few psi for a pressure test. Muffler side I'll probably cut a piece of aluminum plate and put some inner tube on the back

I've used Gorilla Tape alone. Just stick a piece on, poke a couple holes through it and bolt it back together.

Sent from my SM-T900 using Tapatalk

 

[sawnami]

I don't even think it has a crankcase leak because I saw the carb visibly dumping fuel randomly when the saw was off lol but I'm going to test it just because y'all keep saying to

Pressurize the fuel inlet side of the carb. It should hold 5PSI. If not, you've got a needle and seat problem.

Sent from my SM-T900 using Tapatalk

 

[Ethan Hamby]

Pressurize the fuel inlet side of the carb. It should hold 5PSI. If not, you've got a needle and seat problem.

Sent from my SM-T900 using Tapatalk

I stripped the huztl carb and have an OEM tillotson on the way