how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Chris Zautner]

Those sizes will go in a large flat rate box. I got 68 lbs of AR 500 steel targets that way one time. 70 lbs is the limit in it but it's 24x12x3thick if I remember right. 2 of those would get it cross country

Sounds Like I have an Expensive humidor build in my future lol.

 

[cobey]

@cobey hows that hand?

Got stiches out.... its just got to heal now

 

[67L36Driver]

Each one of my girls have a motocross helmet and I always make them ride the minibike with closed toe shoes and pants. Dress for the slide, not the ride.

Your health care provider is in for a hell of a ride to boot.

 

[Ethan Hamby]

Told someone not to get the ms660 kit because the cylinder and many other parts will need replaced and he got mad... Lol

 

[Ethan Hamby]

I honestly can't recommend those kits to anyone lol I've had a hell of a time with getting it running right

 

[Workshop]

I honestly can't recommend those kits to anyone lol I've had a hell of a time with getting it running right

We all make mistakes, Ethan. Especially me, when it comes to saws. I've picked up some real junk in the past. And I've let some real jewels slip away. Foolishly.
I like to think I've gotten a little smarter about saws, but then I still get in my own way.

 

[lumberjackchef]

I need some help from you Mid-lander's, I need to make a beautiful humidor for a relative and I'm looking for some nice grade Osage orange lumber with minimal to no Knots please. I would like it to be dried if possible. Here's The dimensions I need
length 20" Width 12" thickness 2" X 1
length 20" Width 8" Thickness 1 1/2" X 2
Length 14" Width 8" thickness 1 1/2" X 2
Length 20" width 12" thickness 1 1/2 X 1

Please anyone that can help me here It would be awesome. I must!! have this Humidor built by the end of June. Please PM me
Thank you,
Chris Zautner.

P.S. I will take pictures and will create a build thread once done.

As matt mentioned getting usable lumber out of osage orange is tricky but still possible in your time frame...I have to take my buddy a little jag of cedar next week and he mentioned the other day that he was getting ready to need some more osage orange.....I will go ahead and find a couple decent logs to throw in the band mill and take that to him as well. I can have him throw it in the kiln for trade out so it can be finished out around 6-8%..............

@Hedgerow do you have any decent straight grained clear hedge logs scouted??? I know where a couple are but not sure about diameter.......

If you find it elsewhere already to go.....no problem!......... but if not I will go ahead and do this and just shoot me a reminder here in a couple weeks and I will let ya know when it should be ready to ship........

Sent from my N9516 using Tapatalk

 

[Ethan Hamby]

We all make mistakes, Ethan. Especially me, when it comes to saws. I've picked up some real junk in the past. And I've let some real jewels slip away. Foolishly.
I like to think I've gotten a little smarter about saws, but then I still get in my own way.

maybe the new carb will fix it... Otherwise I've got an air leak

 

[Workshop]

maybe the new carb will fix it... Otherwise I've got an air leak

It's a problem, yes. But I wouldn't say it's insurmountable. It's fixable. A technical mystery. The mystery is right under your nose, grasshopper. Think the system.

 

[Chris Zautner]

As matt mentioned getting usable lumber out of osage orange is tricky but still possible in your time frame...I have to take my buddy a little jag of cedar next week and he mentioned the other day that he was getting ready to need some more osage orange.....I will go ahead and find a couple decent logs to throw in the band mill and take that to him as well. I can have him throw it in the kiln for trade out so it can be finished out around 6-8%..............

@Hedgerow do you have any decent straight grained clear hedge logs scouted??? I know where a couple are but not sure about diameter.......

If you find it elsewhere already to go.....no problem!......... but if not I will go ahead and do this and just shoot me a reminder here in a couple weeks and I will let ya know when it should be ready to ship........

Sent from my N9516 using Tapatalk

I have been talking to Alan as he has a saw mill, he is trying to locate some Osage Orange to mill up for me. I will definitely let you know what goes on. I will be building this humidor in my spare time, so it will take me a while to build it.
Thank you,
Chris Zautner.

 

[Ethan Hamby]

It's a problem, yes. But I wouldn't say it's insurmountable. It's fixable. A technical mystery. The mystery is right under your nose, grasshopper. Think the system.

I'm going to order the tillotson carb and if that doesn't fix it get a vaccum pump I need one anyways

 

[cobey]

maybe the new carb will fix it... Otherwise I've got an air leak

Air leaks can be fixed my friend

 

[Dub11]

Well made it to work and boy what a trip. I live 7 miles from my job almost north to south and boy those roads went down hill quick so to anyone driving watch out for dumb dumbs because there out there.

 

[cobey]

Well made it to work and boy what a trip. I live 7 miles from my job almost north to south and boy those roads went down hill quick so to anyone driving watch out for dumb dumbs because there out there.

Glad you made it home safe.
You in Topeka?

 

[Dub11]

Yes and I just made it work who know what the morning will bring.

 

[cobey]

My buddy Ron used to announce for heartland park Topeka, I helped one time on super chevy weekend and was up there for one year of drag week

 

[Locust Cutter]

Well made it to work and boy what a trip. I live 7 miles from my job almost north to south and boy those roads went down hill quick so to anyone driving watch out for dumb dumbs because there out there.

I didn't get out of McConnell until around 1530... Then had to take care of a bunch of crap around the house. Then I got to load up a rick and bring to my friend living off of Meridian... I saw around 9 different cars in the ditch between 135 and 235 South interchange...

 

[cobey]

I didn't get out of McConnell until around 1530... Then had to take care of a bunch of crap around the house. Then I got to load up a rick and bring to my friend living off of Meridian... I saw around 9 different cars in the ditch between 135 and 235 South interchange...

Glad you made it home safe

 

[Hedgerow]

I have been talking to Alan as he has a saw mill, he is trying to locate some Osage Orange to mill up for me. I will definitely let you know what goes on. I will be building this humidor in my spare time, so it will take me a while to build it.
Thank you,
Chris Zautner.

I'll dig around and try to find some straight ish, knot free ish, stuff for Alan to cut the pieces out of.

 

[Ethan Hamby]

@cobey it's definitely fixable it's just a pain I was hoping it would be good to go