how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Ethan Hamby]

A "honest" squish measurement of .014 should be fine on that saw; I've safely run as low as .012, that is measured by cranking the saw over with .030 solder in squish band, and bottom-end of saw good and tight. I might not chance it either with Chinese bearings.

I'll be in Viola Saturday, that's pretty close!

you should meet up with me. That's close. Lol. Also I'm going to bevel the edges around the ports and transfers then I'll check the squish on my saw. Might not even be the same as his haha

 

[Ethan Hamby]

OEM tensioner works great. Didn't need one of the parts that's 8.99 I can get back lol

 

[67L36Driver]

People bring by weed wackers and such but I send them packing (unless they are a close neighbor or it's a simple fix).

We do chainsaws Period!

So what appears in my driveway but a kid with a Craftsman blower. Only run on choke. Classic.

Sent him to Ace where he got it.

 

[Ethan Hamby]

It keeps trying to drag the plastic part with it. Idk why. With it screwed down with the cover on it

 

[Ethan Hamby]

Fixed it... With some... Force.. lol

 

[Jetmd]

And this is a micrometer:
View attachment 44508

Is that what those are called?

I use them instead of 'C' clamps, they seem to have a lot of mechanical advantage.

 

[67L36Driver]

Is that what those are called?

I use them instead of 'C' clamps, they seem to have a lot of mechanical advantage.

It's the fine threads on 'em. Got a drawer full of 'em. Handy for weldin' stuff.

 

[lumberjackchef]

Hey anybody recognize the make and model of this old dude. Darick picked it up for 10$ said its got hella compression......

Sent from my N9516 using Tapatalk

 

[MG2186]

Is that what those are called?

I use them instead of 'C' clamps, they seem to have a lot of mechanical advantage.

NICE! Haven't heard em used for that before! If I seen somebody using mine for C clamps I probably would have a few choice words to say....


Sent from my iPhone using Tapatalk

 

[Hedgerow]

Hey anybody recognize the make and model of this old dude. Darick picked it up for 10$ said its got hella compression......

Sent from my N9516 using Tapatalk

Idk, but it's left handed!

 

[Homelite410]

Battery eating suckers they are..
Lol.

Amatures [emoji6]

The more expensive ones automatically shut themselves off which is a nice feature, definitely helps with battery life


Sent from my iPhone using Tapatalk

 

[Homelite410]

Digitals are OK but I like to see the swing on a dial to get the range more readily, kind of like reading a clock if ya will.

 

[concretegrazer]

Idk, but it's left handed!

Easy fix.

 

[WKEND LUMBERJAK]

You all been busy today must be the weather.


You guys up north need to close the door this weekend supposed to be 2 degrees this Saturday.

 

[Homelite410]

You all been busy today must be the weather.


You guys up north need to close the door this weekend supposed to be 2 degrees this Saturday.

The fans in northern IA are pointed south....

 

[lumberjackchef]

Think I found it!!



. http://www.acresinternet.com/cs...6ed90b98bd5682c88256cde000e8d8b?OpenDocument

Sent from my N9516 using Tapatalk

 

[WKEND LUMBERJAK]

The fans in northern IA are pointed south....

I see how it is.................................................................................

 

[WKEND LUMBERJAK]

Think I found it!!



. http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/06ed90b98bd5682c88256cde000e8d8b?OpenDocument

Sent from my N9516 using Tapatalk

can't see it

 

[concretegrazer]

Think I found it!!



http://www.acresinternet.com/cscc.n...06ed90b98bd5682c88256cde000e8d8b?OpenDocument

Sent from my N9516 using Tapatalk

I fixed the link I think.

 

[MG2186]

The fans in northern IA are pointed south....

We don't mind sharing do we Mike, if I could I would give you all this cold crap we are having


Sent from my iPhone using Tapatalk