how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[67L36Driver]

Battery pack out of a Volt?

Tractor beam for his new star destroyer.

 

[sawnami]

Battery pack out of a Volt?

Yep. 360 volts 288 lithium-ion cells.

Sent from my SM-N910V

 

[hoskvarna]

And what ya gonna do with that?


Sent from Hoskvarna hills

 

[Hedgerow]

And what ya gonna do with that?


Sent from Hoskvarna hills

He's gonna bzzzzzzzttt somebody..

 

[Hedgerow]

Yep. 360 volts 288 lithium-ion cells.

Sent from my SM-N910V

And you think the Samsung phones were bad, wait till that baby Melts down.

 

[Workshop]

Yep. 360 volts 288 lithium-ion cells.

Sent from my SM-N910V

Just curious, what's the price to replace one of those?

 

[Workshop]

Perfect temp for working out in the shop. Time to start going through these boxes I got from Marc. I have a propane patio heater next to my bench. Does a nice job. Until the propane runs out.
First box off the shelf has a 55cc Craftsman in it. Time for a little investigating.

 

[sawnami]

And what ya gonna do with that?


Sent from Hoskvarna hills

Replacing the #2 pack. That big black box balances the cells after replacing the pack. ($5,000 battery charger)

Sent from my SM-T900 using Tapatalk

 

[Ethan Hamby]

The tensioner sucks. Lol. Time for oem

 

[Dub11]

maybe fuel lines too

 

[Ethan Hamby]

Everything else seems to be of good quality but the tensioner is just *s-word. Lol. Literally won't even hardly move. Not knowing how to put the *s-word together doesn't help

 

[sawnami]

Just curious, what's the price to replace one of those?

Replaced this one under the 10 yr 100,000 mi warranty. Not sure what a complete drive motor battery would run. Everything is repairable/replaceable in them so not much call for an assembly.

Sent from my SM-T900 using Tapatalk

 

[Ethan Hamby]

One cell being bad and driven that way for any length of time could cause a full pack failure lol

 

[67L36Driver]

The tensioner sucks. Lol. Time for oem

My take on those is they need deburring with a small file.

My 361 is 'crunchy' but works.

 

[Ethan Hamby]

My take on those is they need deburring with a small file.

My 361 is 'crunchy' but works.

mine doesn't work at all

 

[Workshop]

Replaced this one under the 10 yr 100,000 mi warranty. Not sure what a complete drive motor battery would run. Everything is repairable/replaceable in them so not much call for an assembly.

Sent from my SM-T900 using Tapatalk

Always wondered if the packs were rebuildable or if the whole thing had to be replaced. What size are the individual cells? Can they be replaced individually?

 

[Workshop]

View attachment 44409
Perfect temp for working out in the shop. Time to start going through these boxes I got from Marc. I have a propane patio heater next to my bench. Does a nice job. Until the propane runs out.
First box off the shelf has a 55cc Craftsman in it. Time for a little investigating.

Mounted up on the bench, pulled the plug and spun it with a drill. Got spark. Put the recoil back on, dribbled some mix down the carb and pulled. Little devil fired up. Put some fuel in the tank. Leaking at the seam. I suspect it was dropped. Ran a bead of SealAll along the seam. Time let it sit overnight. Serial number starts out with 358 then is unreadable. I forget, is 358 built by Poulan?

 

[Homelite410]

Bzzzzzzzzzzzt

Sent from my SM-N910V

Damn good to hear from you Steve, I missed you!

 

[Homelite410]

Evening fellas, kinda stressed but wanted to say hey. Its time so start saying no to working on other peoples junk.

 

[Workshop]

Found code 358 built by beared/poulan.