how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Semotony]

got a bit of that here also Good morn

 

[67L36Driver]

I knew that it was being discussed.

Any idea when it will be closed down ? I haven’t been that way for a while.

When ‘construction season’ hits.

 

[Mastermind]

Warmed up here. 20° this morning with sunshine.

 

[stihl livin]

Warmed up here. 20° this morning with sunshine.

I’d move

 

[Mastermind]

I’d move

Too much invested here. Done drove my stakes in the ground.

 

[Semotony]

When ‘construction season’ hits.

Construction's been going on for a long time - 55 St. Louis 64 & 55 up north to where it goes from 3 lane to 2 lane. Seems like eternity even tho it's been forever only
Hit the high of 35, down hill from here. 11° 5-7a.m. they guess

 

[Sawdust Man]

.

Another cedar ish kinda day........

 

[Only the Tony]

Morning all. Will somebody close the border from Canada? It's too cold out at 13° right now. At least it's going to warm up a little today with a high expected of mid 40's.

 

[Workshop]

Morning everybody.
Heading down to the Stamp today.

 

[stihl livin]

Morning all. Will somebody close the border from Canada? It's too cold out at 13° right now. At least it's going to warm up a little today with a high expected of mid 40's.

Remember that when your drunk heat and humidity end up in the north and we ask you to do the same

 

[Sawdust Man]

13/43 sunny.

Good morning guys.

 

[Hinerman]

Remember that when your drunk heat and humidity end up in the north and we ask you to do the same

Right. Mid 40s with sun shining and no wind is pretty near perfect

 

[nbbt]

Good morning folks. I woke up earlier, saw that it was +1f, stretched a bit and plopped back into bed. Coffee now, so hopefully napping is over.

 

[Sawdust Man]

Right. Mid 40s with sun shining and no wind is pretty near perfect

amen.

 

[67L36Driver]

Got to 34 here in the Blacksnake Hills today.

Above freezing!

 

[Hedgerow]

.

Another cedar ish kinda day........

View attachment 447850View attachment 447851View attachment 447852

That white wood is gonna be treacherous..

But no problem if ya edge it.

 

[Hedgerow]

Norwood mills..

Someone tell me why I shouldn’t get one..

Trust me, I’m open to those suggestions..

 

[Hedgerow]

Cuz the LT 35 or 40 is what I’m looking at right now.

 

[Sawdust Man]

That white wood is gonna be treacherous..

But no problem if ya edge it.

Sapwood was frozen....frozen green cedar sapwood mills very poorly....makes the blade nose dive.

Norwood mills..

Someone tell me why I shouldn’t get one..

Trust me, I’m open to those suggestions..

I had a Norwood mn27 for a short time.... it worked....sorta....compared to a Woodmizer, they're garbage imo.
Norwood's customer service is completely non-existent in my experience......my mill arrived in boxes in regular Norwood fashion, but it was missing the box with the water lube system, the depth scale, and most importantly all the guards that enclose the blade.....
I contacted them literally dozens of times, and they never got me the parts.....ended up selling the mill incomplete, as-was.

If you want to go with a lower cost mill look at the Woodland mills, would be my suggestion.

Cuz the LT 35 or 40 is what I’m looking at right now.

Woodmizer has been offering some pretty good deals lately.

 

[Only the Tony]

I guess it is morning now, seems just a little early. Starting the day above freezing at 33°. Looks to be going up to about 50°. May go looking for some soft water north of here in a bit.