how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[67L36Driver]

Tom:

One can start by culling out the ones that do not have the High & Low mix screws.

Obviously failed in service.

 

[WKEND LUMBERJAK]

How bout "scrap aluminum is going for $1 a pound" . ??

Problem is they have other metal in them won't get that price probably 5cents

 

[Semotony]

Problem is they have other metal in them won't get that price probably 5cents

Just a little disassembly lol earlier this year I got $2.58 # for brass. Gotta be some brass in some of them lol

 

[Hedgerow]

Problem is they have other metal in them won't get that price probably 5cents

In that case...

Dumpster fodder...

 

[WKEND LUMBERJAK]

Just a little disassembly lol earlier this year I got $2.58 # for brass. Gotta be some brass in some of them lol

That's a lot of time disassembling to get the butter flies.

 

[Semotony]

That's a lot of time disassembling to get the butter flies.

I'm retired on disability and Social insecurities so time has no $ value; allows for another perspective & don't forget the adjustment screws

 

[Workshop]

Morning everybody.

 

[Hinerman]

That's a lot of time disassembling to get the butter flies.

A person could spend hours getting the brass out for only a few ounces.
If nobody wants them they will be taken to the scrap yard

 

[Semotony]

A person could spend hours getting the brass out for only a few ounces.
If nobody wants them they will be taken to the scrap yard

A buddy of mine said I was a commodity trader since I picked $2 of aluminum cans from trash cans and had winning bid on a couple of $20 gold pieces at same auction. The brass I sold earlier this year had accumulated over time from yard sales, auctions and the like.
When the yard waste dump is along the way the 017 may get used to pack the focus with for woodor bags of grass/leaves will get brought back for compost pile. Or the ground road asphalt may get shoveled to continue the improvement on the driveway
Just keeping a lil occupied, and once the aluminum of those carbs is alone it goes back up to0 a buck a #

 

[JimBear]

A person could spend hours getting the brass out for only a few ounces.
If nobody wants them they will be taken to the scrap yard

It sounds to me like there is a fella over by St. Louis that would take them off your hands…

 

[67L36Driver]

Stihl four mix carb. Note the largish impulse spigot.

Stihl 25cc weed wacker carb (HT 75) carb.

Chit can ones like the left (non adjustable).

 

[KS Plainsman]

I'd never even ran a 4 mix until I got my Kombi. Pretty interesting difference from a 2 stroke. I like it.

 

[Semotony]

It sounds to me like there is a fella over by St. Louis that would take them off your hands…

Sometimes it's just a alternative idea to keep conversation going. Never an idea what may come up that's new to me.

 

[Hinerman]

I'd never even ran a 4 mix until I got my Kombi. Pretty interesting difference from a 2 stroke. I like it.

I used Stihl 4 stroke mixers for several years at the church. I liked them well enough. It really doesn't matter to me; I just need them (2 stroke or 4 stroke mixer) to start and spin without too much trouble.

 

[KS Plainsman]

I used Stihl 4 stroke mixers for several years at the church. I liked them well enough. It really doesn't matter to me; I just need them (2 stroke or 4 stroke mixer) to start and spin without too much trouble.

I can agree with that! A lot of my noticing differences, is probably because I went from a 20.something cc Tanaka string trimmer to the largest Kombi, a 36cc I believe, or maybe 35.something cc. I used the Kombi when I got it home, but still use the Tanaka, because it's still a very good runner. 10 years old and I only had to mess with the idle screw once, the kill switch doesn't work and the head finally grenaded, but other than that, it's been flawless. I put a Oregon Speed Feed 450 head on it, just to keep it going. Not bad for 200 bucks.

 

[Hinerman]

Good Morning Keepers of the Saw...

 

[Workshop]

Morning everybody.

 

[Jetmd]

Because you can never have too much!!

 

[MACHINE]

Any of you fool with LP on small engines??

Sent from my SM-G975U1 using Tapatalk

 

[JimBear]

No, but I have been looking at propane generators.