how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Locust Cutter]

An 046 would be a fine addition, though if/when I buy my 390xp, my 372 may go down the road. I really like 70cc saws, but a ported 390 isn't appreciably bigger or heavier but the power difference has to be felt. Plus I use my 562 p times out of ten after it gets too big for the 50cc saws but less than about 25". Nice saw!

 

[Manofstihl661]

An 046 would be a fine addition, though if/when I buy my 390xp, my 372 may go down the road. I really like 70cc saws, but a ported 390 isn't appreciably bigger or heavier but the power difference has to be felt. Plus I use my 562 p times out of ten after it gets too big for the 50cc saws but less than about 25". Nice saw!

Yes just got her in but I've been suffering a migraine for a few goes and it just started lowering.

Same gentlemen who sold me the 046 is trying to talk me into his snellerized 385xp

 

[Locust Cutter]

That might be a worthwhile investment. I know a 395xp can be made stronger than a 390/385xp but it's also a good bit bigger and I already have a ported 9010, so the 395 would be just because. The a 385xp/390xp would see a lot more use at my place than another 95+ cc saw. Looks like that 046 could be fun in Oak, Hedge and any sizable Mesquite...

 

[Locust Cutter]

A MS461 and Dolmar 7900/7910 may eventually find their respective ways into my barn though...

 

[Manofstihl661]

That might be a worthwhile investment. I know a 395xp can be made stronger than a 390/385xp but it's also a good bit bigger and I already have a ported 9010, so the 395 would be just because. The a 385xp/390xp would see a lot more use at my place than another 95+ cc saw. Looks like that 046 could be fun in Oak, Hedge and any sizable Mesquite...

There's a "brand new" 395xp for sale locally for $800. Just don't have funds for it. I have a ms660 that is going to be my milling saw. Don't have trees to justify lugging it around. 046 is a great weight and it's fully ported.

I always wanted a 661/461 combo so the 660/046 is as close as I've got so far and I'm happy.

I am selling off some other saws but they are farm and ranch line.

 

[MG2186]

An 046 would be a fine addition, though if/when I buy my 390xp, my 372 may go down the road. I really like 70cc saws, but a ported 390 isn't appreciably bigger or heavier but the power difference has to be felt. Plus I use my 562 p times out of ten after it gets too big for the 50cc saws but less than about 25". Nice saw!

I have 2 ported 2171's and a ported 2186, I do 85% of my cutting with the 71's, anything from 20"-28" bar. Only time I use the 86 is with the 36" bar on it. That's just my perspective. I got a 562 whenever Allen gets it done so my view my change some but I doubt it. Those 71's are enough lighter to me and are just as fast with a 24" or less bar on them than the 86


Sent from my iPhone using Tapatalk

 

[Manofstihl661]

I have 2 ported 2171's and a ported 2186, I do 85% of my cutting with the 71's, anything from 20"-28" bar. Only time I use the 86 is with the 36" bar on it. That's just my perspective. I got a 562 whenever Allen gets it done so my view my change some but I doubt it. Those 71's are enough lighter to me and are just as fast with a 24" or less bar on them than the 86


Sent from my iPhone using Tapatalk

Mmmm if you ever let go of a 2171 let me know I know a guy who has been wanting one bad but I've been getting the itch for a red saw too

 

[cobey]

Step away from the ebay Cobey...

I was ordering saw parts.....
And stuff.... I don't need more saws

 

[cobey]

Working on the never fueled
Cs 550 echo I got from mike.
Replacing the case.....
It looks like it exploded
All over my shed
Weird carburetor

 

[MG2186]

Mmmm if you ever let go of a 2171 let me know I know a guy who has been wanting one bad but I've been getting the itch for a red saw too

I've got enough parts to build 3 more... lol


Sent from my iPhone using Tapatalk

 

[MG2186]

Mmmm if you ever let go of a 2171 let me know I know a guy who has been wanting one bad but I've been getting the itch for a red saw too

Oh... I doubt I will ever sell either one of the 71's I'm running now unless someone offered me a stupid amount of money for one of them


Sent from my iPhone using Tapatalk

 

[Manofstihl661]

I've got enough parts to build 3 more... lol


Sent from my iPhone using Tapatalk

Let me know when the next one is built lol

I know I'm new to the thread so I'll preface with I'm ate up with CAD bad lol.

I've been in the AS site longer than OPE so I'm trying to get to know folks here as well

 

[MG2186]

Let me know when the next one is built lol

I know I'm new to the thread so I'll preface with I'm ate up with CAD bad lol.

I've been in the AS site longer than OPE so I'm trying to get to know folks here as well

CAD is bad deal.... lol! I'll let u know on a 71


Sent from my iPhone using Tapatalk

 

[Homelite410]

Mmmm if you ever let go of a 2171 let me know I know a guy who has been wanting one bad but I've been getting the itch for a red saw too

Red saws are sexxy! Welcome to the thread!

 

[Manofstihl661]

CAD is bad deal.... lol! I'll let u know on a 71


Sent from my iPhone using Tapatalk

No biggie. I don't NEED another saw lol.

 

[Dub11]

No biggie. I don't NEED another saw lol.

I dont need a saw period! Thats why I got 12 or so.

 

[Manofstihl661]

I dont need a saw period! Thats why I got 12 or so.

Hahaha I do have a need for 1 saw. But after that I guess the need is hard to justify. I need a good GTG to test out other saws

 

[Manofstihl661]

Red saws are sexxy! Welcome to the thread!

That's a great photo!! I'm a creamsickle man myself obviously and thanks!

 

[WKEND LUMBERJAK]

Oh... I doubt I will ever sell either one of the 71's I'm running now unless someone offered me a stupid amount of money for one of them


Sent from my iPhone using Tapatalk

I'll give you $5.00. Is that ridiculous enough.

 

[67L36Driver]

ChrisJ (?) is in the Houston area.