how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Jetmd]

I would gladly give you $50 & a 12 pack of beer for the Crest Ultrasonic Cleaner

 

[Workshop]

Morning everybody.

 

[ayoungtexan]

Good morning fellas

 

[JimBear]

I would gladly give you $50 & a 12 pack of beer for the Crest Ultrasonic Cleaner

I will have to pass on that offer. I should of bought a bigger one though, I talked/thought myself out of it. I guess I should of talked to someone that knows something...

 

[moparnut88]

I will have to pass on that offer. I should of bought a bigger one though, I talked/thought myself out of it. I guess I should of talked to someone that knows something...

How big is that one?


Sent from my iPhone using Tapatalk

 

[Hedgerow]

Any of you gents interested in a 16” Dolmar .050” bar & Qty 4 Stihl 3/8”fc x 64dl x .050”skip link chains. Apparently somebody was asleep at the wheel when sharpening the one side of the marked chain , I didn’t notice that snafu until I took the picture. There are some buggered up drive links on two of the chains, the picture shows the worst ones. I got these with a 5105 I bought, ran them & resharpened (well sort of ). I have an 18” on it now & I have plenty of 16” chains for my 261.

$40 ???


View attachment 251175 View attachment 251176 View attachment 251177 View attachment 251178 View attachment 251179

64dl of 3/8" would be bigger than 16" bar no?

 

[Jetmd]

I will have to pass on that offer. I should of bought a bigger one though, I talked/thought myself out of it. I guess I should of talked to someone that knows something...

I should have bought a larger unit also.

But I would never give mine up. The are a great tool.

 

[Hinerman]

64dl of 3/8" would be bigger than 16" bar no?

Yes, my 16s are 60dl, but bars are all over the place sometimes depending on brand. A stihl 18" is 66dl but a sugi 18" is 68dl. I am more confused by skip chain on a 16" bar, especially off of a Dolmar 5105!!!!

 

[67L36Driver]

Hunters lawn care got started on the pine & pear this morning. A week behind, they are.

Also, yesterday.

Always hold three suited large cards. [emoji106]

Same machine on December 23.

 

[Dub11]

64dl of 3/8" would be bigger than 16" bar no?

Dolmar call it an 18" but really it's 17"ish.

I found it do be dumb and punted the b/c that I came across asap.

 

[JimBear]

How big is that one?


Sent from my iPhone using Tapatalk

If I remember correctly it’s either 5L or 6L. The tank is roughly 11.5”L x 5.75”W x 5”D at the full line. Came with a basket.

 

[JimBear]

64dl of 3/8" would be bigger than 16" bar no?

Technically yes but they call it a 16”, pictured are 2 18” bars & the 16”

 

[JimBear]

Yes, my 16s are 60dl, but bars are all over the place sometimes depending on brand. A stihl 18" is 66dl but a sugi 18" is 68dl. I am more confused by skip chain on a 16" bar, especially off of a Dolmar 5105!!!!

Stihl 3/8”
16” - 60DL
18” - 66DL, My Tsumura bar is 66 DL, same Stihl & GB bars.
20” - 72DL
24”/25” - 84DL, I think this is the only chain that is universal to Stihl/Husky but I maybe wrong.
28” - 91DL
36” - 114DL
As far as 16” skip link on a 5105, it had no problem pulling it stock or after @Miller Mod Saws got done with it. It also came with .325 accessories as well. I don’t remember what size, they went to @countryhog.

 

[Hedgerow]

Technically yes but they call it a 16”, pictured are 2 18” bars & the 16”

View attachment 251288 View attachment 251290 View attachment 251291

Well if you can’t get any takers on the bar and chains, I can use em.
We’ll have to set up a meet and drop exchange somewhere.

 

[JimBear]

Well if you can’t get any takers on the bar and chains, I can use em.
We’ll have to set up a meet and drop exchange somewhere.

They are yours.

 

[Hedgerow]

Oh, and I don’t give a *s-word about a damaged drive link..
It’ll conform sooner or later...

Just gotta beat it to submission.

 

[Hedgerow]

They are yours.

Tell Carl to run them south.
He rolls through here now and then.

 

[Hinerman]

As far as 16” skip link on a 5105, it had no problem pulling it stock or after @Miller Mod Saws got done with it.

That's my point, a 5105 has no problem with regular skip chain on a 16" bar, especially ported. Heck, I think Matt has a 20" on his with regular skip chain. I've just never seen full skip on a bar that small, so it seems odd. It is less to sharpen, which is always nice. It would be interesting to see how it cuts.

 

[67L36Driver]

Morning midlanders !

Foolish idea?

I would have the tree guys leave all the 10” and larger and carry away the small stuff from the pine and pear.

I can cut it up to firewood lengths and pile it so it would be easy for folks to drag off for their fire pits and such.

I bet it would all be gone by February. [emoji848]

Stupid? Yes, no?

 

[67L36Driver]

Dupe! Tapatalk/WiFi failure. [emoji19]