toolmaker
Super OPE Member
- Local time
- 9:22 AM
- User ID
- 11603
- Joined
- Jan 31, 2020
- Messages
- 265
- Reaction score
- 543
- Location
- Tyrone, Pa
I had sort of a double testing session today. My first port job on my 036 Pro, and tried some EXL that I bought from a forum member.
The only thing I did to the chain was take 3 light licks off the rakers, It was the OEM shaprening on the cutters.
I have to admit, I was impressed!
It cut very, very well in crosscut and noodling.
This was one of the very few chains that I did not sharpen right out of the box.
The gullet was pretty deep and it had a nice downward angle. Not as much that I file in to the cutters, but it cut extremely well
Oh, the saw ran like a fool!! Me likey!
The only thing I did to the chain was take 3 light licks off the rakers, It was the OEM shaprening on the cutters.
I have to admit, I was impressed!
It cut very, very well in crosscut and noodling.
This was one of the very few chains that I did not sharpen right out of the box.
The gullet was pretty deep and it had a nice downward angle. Not as much that I file in to the cutters, but it cut extremely well
Oh, the saw ran like a fool!! Me likey!