High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

Chainsaw grinder questions, tips, tricks, and pics!!!!

redneckhillbilly

Pinnacle OPE Member
Yearly GoldMember
Local time
1:53 PM
User ID
23623
Joined
May 30, 2022
Messages
499
Reaction score
1,451
Location
NW MT
Country flag
27ish/55/0 is what I came up with for my 1st chain, Im gonna bury it a piece of doug fir in a few hours and test it.

I gotta admit this is the fastest I've ever sharpened a chain, I am liking having a grinder so far.

quick question, do you think leaving the chain oily while grinding will help the steel retain it's temper?
 

Attachments

  • IMG_20250803_093517024.jpg
    IMG_20250803_093517024.jpg
    68.1 KB · Views: 9

Philbert

Chainsaw Enthusiast
Local time
2:53 PM
User ID
737
Joined
Jan 30, 2016
Messages
4,844
Reaction score
20,297
Location
East Dakota
Country flag
30/55/0 Im setting up to grind my 1st chain ever, been a hand filer my whole life, but I have to many saws and too many chains now to get motivated to hand file. bought a Vevor last week and I think I have it setup properly now. not looking for a race chain, just a modest grind to cut softwood firewood with.
My generic advice to all who are new to grinders:

‘Keep in mind that grinders don’t sharpen the chains: you sharpen the chains.

For guys new to grinding I recommend taking an old or ‘scrap’ chain, and experimenting with it, before you work on your ‘good’ chains:

- ‘play’ with every adjustment on the grinder separately, and see what each does to the cutter profile;

- intentionally try to overheat, or ‘burn’ a cutter, then work backwards to see how to avoid that (lots of small taps, no sustained contact );

- place a sharp chain that you like in the grinder, with the power ‘Off’, and try to ‘copy’ those angles and settings with the grinder adjustment (and write those settings down);

- profile the rim of the grinding wheel, with the dressing brick, then lightly dress the wheel once per chain loop, to continuously expose fresh, sharp, abrasive;

- practice, and don’t worry about speed - that will come with experience.

- grind with the rim of the wheel, not the side!’

IMG_4908.jpeg

Philbert
 

redneckhillbilly

Pinnacle OPE Member
Yearly GoldMember
Local time
1:53 PM
User ID
23623
Joined
May 30, 2022
Messages
499
Reaction score
1,451
Location
NW MT
Country flag
i took the time yesterday to read this whole thread and soak up all the info I could, I grabbed my most worn chain this morning and gave it a go, I am pleased with how it looks and feels, but the proof will be when I take it to the woodpile.

I didnt burn any cutters, I took very light swipes and tried to do all cutters equally.
 

Duane(Pa)

It's the chain...
GoldMember
Local time
3:53 PM
User ID
325
Joined
Dec 30, 2015
Messages
4,840
Reaction score
24,416
Location
Centre County
Country flag
27ish/55/0 is what I came up with for my 1st chain, Im gonna bury it a piece of doug fir in a few hours and test it.

I gotta admit this is the fastest I've ever sharpened a chain, I am liking having a grinder so far.

quick question, do you think leaving the chain oily while grinding will help the steel retain it's temper?
Oil is the enemy. It will clog the abrasive and next thing you have is heat! Heat is what takes the temper out of teeth.
 

redneckhillbilly

Pinnacle OPE Member
Yearly GoldMember
Local time
1:53 PM
User ID
23623
Joined
May 30, 2022
Messages
499
Reaction score
1,451
Location
NW MT
Country flag
anybody have anything good or negative to say about the $69 cheapo CBN wheels on Amazon?
 

Philbert

Chainsaw Enthusiast
Local time
2:53 PM
User ID
737
Joined
Jan 30, 2016
Messages
4,844
Reaction score
20,297
Location
East Dakota
Country flag
I am not a fan of the CBN wheels. I know that makes me an outlier.

I did not like the finish I got with $100 wheels off Amazon. I could still overheat a cutter, if not careful.

I don’t have a problem with good quality vitrified wheels, *** as long as they are regularly dressed *** (lightly, once per loop).

I can shape them for custom profiles. I can get them for $15 each (or free from guys who buy CBN wheels!).

They do produce more dust, but I try to grind outside.

Some guys report better results with better brands of CBN wheels, but not likely the cheapest ones.

Philbert
 

redneckhillbilly

Pinnacle OPE Member
Yearly GoldMember
Local time
1:53 PM
User ID
23623
Joined
May 30, 2022
Messages
499
Reaction score
1,451
Location
NW MT
Country flag
I'm just a firewood hack, I cut about 15 cords a year, I only own a total of about 15 chains for use between my 4 saws.

I tuned in all my .325 stuff today (7 chains), in a few days I will do the 3/8 stuff after I do some cutting.

I'm not sure I really need a CBN wheel, I am happily satisfied with the grinder and wheel that I used so far, I'm not going to be sharpening anyone else's chains and honestly I dont really have a whole lot of chains I use.

I think I'm going to just run this setup and be happy I didnt have to tune in 7 chains today by hand file.
 

lehman live edge slab

Live Action
Local time
2:53 PM
User ID
3953
Joined
Sep 2, 2017
Messages
4,418
Reaction score
15,417
Location
Mn
Country flag
I am not a fan of the CBN wheels. I know that makes me an outlier.

I did not like the finish I got with $100 wheels off Amazon. I could still overheat a cutter, if not careful.

I don’t have a problem with good quality vitrified wheels, *** as long as they are regularly dressed *** (lightly, once per loop).

I can shape them for custom profiles. I can get them for $15 each (or free from guys who buy CBN wheels!).

They do produce more dust, but I try to grind outside.

Some guys report better results with better brands of CBN wheels, but not likely the cheapest ones.

Philbert
So far I’ve had good luck with my cbn wheel I bought from diamond wheel out of southern Minnesota. Probably have sharpened 5-600 chains at least with it.
 

lehman live edge slab

Live Action
Local time
2:53 PM
User ID
3953
Joined
Sep 2, 2017
Messages
4,418
Reaction score
15,417
Location
Mn
Country flag
I just have the cheap Oregon knock off grinders for now, I go 60 on head tilt 30 on top plate angles with the vice tilt at 0. Big think is making sure vice is centered in on stone so left and right cutters match. For the
1/4” and 3/8” picco micro .043 I move the head angle back to 52-55 degrees with all other the same.
 

redneckhillbilly

Pinnacle OPE Member
Yearly GoldMember
Local time
1:53 PM
User ID
23623
Joined
May 30, 2022
Messages
499
Reaction score
1,451
Location
NW MT
Country flag
anyone successfully sharpened a 3/8 chain with an 1/8 inch thick wheel? I noticed on the chart in the back of the manual its lists a few chains that call for the 1/8 wheel.
 

Duane(Pa)

It's the chain...
GoldMember
Local time
3:53 PM
User ID
325
Joined
Dec 30, 2015
Messages
4,840
Reaction score
24,416
Location
Centre County
Country flag
anyone successfully sharpened a 3/8 chain with an 1/8 inch thick wheel? I noticed on the chart in the back of the manual its lists a few chains that call for the 1/8 wheel.
I’m pretty sure those would be 1/4 and 3/8 LP? Might work for 3/8, but not ideal…
 

Squish9

Pinnacle OPE Member
Local time
5:53 AM
User ID
28596
Joined
Feb 27, 2024
Messages
316
Reaction score
1,385
Location
Australia
Country flag
Otherwise, people start grinding with the flat side of the grinding wheel, and that’s part of what gives grinding a bad name.

Philbert
Hey look, a person that understands why a wheel is shaped and how to use it!

I'm ashamed to admit, I only learnt this last year
 

Wilhelm

I'm here for the sick'n twisted company
Yearly GoldMember
Local time
9:53 PM
User ID
1204
Joined
Apr 28, 2016
Messages
14,131
Reaction score
55,893
Location
Croatia
Country flag
I used a 3.2mm wheel in a pinch on a full sized full chisel 3/8" chain not wanting to swap over to the 4.8mm wheel.

The chain did cut, but it didn't hold its edge as long.
 

president

Super OPE Member
Local time
12:53 PM
User ID
14155
Joined
Oct 12, 2020
Messages
273
Reaction score
437
Location
peachland BC Canada
Country flag
If you keep repositioning the wheel and cutter, you can get close to a standard profile on full sized 3/8 pirch chain.

Otherwise, people start grinding with the flat side of the grinding wheel, and that’s part of what gives grinding a bad name.

Philbert
T1, with a 325 wheel ,move the grind forward o the second pass ,to remove the gullet
and achieve a 3/8 grind
 
Top