Any Chinese chainsaw and chinese parts discussion

[Rayman]

be careful, that black copy that is allegedly 92cc is a 372 copy, so not 92cc at all.....

I would love to see someone strip down a sx92 and see whats inside that

Trying to work out what the sx72 is.

 

[Czed]

Just a quick heads up on delivery. Australia Post would charge $137 for 1 saw and $188 for 2. Send & Pack $148 for 1 and $193 for 2. All A$ and 4 days delivery but I would expect that to be a few days more. You can look those carriers up online, they have calculators online.
Also I sent a message to Edison here to see if they would send direct to you. Ended up with a few more jobs to do so saw pics will be a bit later.

I got a reply from Edison and they said they are not able to ship international yet. That sort of suggests they will in the future. Are you guys sure you can't get these saws local or through Canada or Sth America?

Alibaba and aliexpress i can order the 365s from a variety of sources no 372 of any kind it's odd.
Stihl Clone 381 660 070 no 361 440
Kit saw's to build we can get 017 250 361 440 660 070 365s
That's it
the kits were higher than my complete built 365 saw's and some had missing part's and other issue's.
Import restrictions i'm told most will not ship to the us.

 

[Czed]

Trying to work out what the sx72 is.

Pics with top cover off?

 

[Rayman]

Pics with top cover off?

Okay, I will do that tomorrow.

 

[Rayman]

Pics with top cover off?

Having looked at many IPL etc I am convinced that this SX72 is a Zenoah G5200. The question now for me, is it really 72cc? Is it possible to put a 272, 372 top end on that saw? Which Husqvarna was the Zenoah G5200? Pics coming.

 

[Rayman]

Pics

 

[Rayman]

You can see the spare oil worm and the clutch cover with the brake. There is no Decomp, not even a plugged hole.

 

[Czed]

View attachment 98427
Pics

Much better setup than my 58cc china saw had.
I had to put motoseal under the filter to keep fine particle's out.

 

[Rayman]

It could be a HY-7200 but I can't find much info on that one.

 

[Czed]

I put a gallon through the big bore dropping and blocking hickory and maple.
I did have an issue with the large husqvarna west coast felling spike working loose.
Blue loctite solved that.

 

[Rayman]

It could be a HY-7200 but I can't find much info on that one. It is a Zenoah with a 72cc top.

 

[Czed]

It could be a HY-7200 but I can't find much info on that one. It is a Zenoah with a 72cc top.

Have you run it much yet
How does it do?

 

[Rayman]

Have you run it much yet
How does it do?

Have only had to trim a couple of trees. 10 to 12 inch limbs. The saw was very good. Good balance, runs smoothly and plenty of power, so I am very happy with it so far. When I put it back together it would not start but that turned out to be petrol vapor lock, just had to open the tank cap, maybe it needs a small breather hole.

 

[Czed]

@p61 western
My short block came in from huztl
It's hard to see but they are different from my aliexpress saw's.
The part's are interchangeable
Wish huztl would ship these with 372 topends but i have a 372 big bore to put on it.

 

[p61 western]

@p61 western
My short block came in from huztl
It's hard to see but they are different from my aliexpress saw's.
The part's are interchangeable
Wish huztl would ship these with 372 topends but i have a 372 big bore to put on it.View attachment 99740

What all was different Dave? I noticed from pics that yours weren't painted in the crankcase, but that's all I noticed.

 

[Czed]

What all was different Dave? I noticed from pics that yours weren't painted in the crankcase, but that's all I noticed.

Nothing major
Just a different manufacturer
The molds were different for the case's
The tank's are different too
Huztl uses the oem style puck for the tank vent
My other saw's have a vent tube.
They are all well made just different process.

 

[p61 western]

Nothing major
Just a different manufacturer
The molds were different for the case's
The tank's are different too
Huztl uses the oem style puck for the tank vent
My other saw's have a vent tube.
They are all well made just different process.

I haven't had any trouble yet with the tank vent, knock on wood lol.

 

[Czed]

I haven't had any trouble yet with the tank vent, knock on wood lol.

I did with mine starving in long cuts oem style I've never had trouble with.
There's a huztl farmertec saw builders site on Facebook.
There's tons of those saw's out there now people are using them
For businesses too.
And winter projects lol

 

[stihl saws]

I'm going to have to get one of these 372's for a winter project. Then I can document the lengths of the bolts that rattle out.
No worries, I'll order extras.

 

[p61 western]

I'm going to have to get one of these 372's for a winter project. Then I can document the lengths of the bolts that rattle out.
No worries, I'll order extras.

Lol none on mine yet and I didn't use loctite.