Any Chinese chainsaw and chinese parts discussion

[Czed]

Hi guys. Does anyone know what the Braumr sx72 or MTM sx72 is a copy of?

372 if it's the ones i saw.
Looked the same as the baumr ag in different plastics.

 

[Rayman]

372 if it's the ones i saw.
Looked the same as the baumr ag in different plastics.

Hi Czed,
The sx72 has an outboard clutch, is 372 inboard?
Ray

 

[Czed]

Hi Czed,
The sx72 has an outboard clutch, is 372 inboard?
Ray

2 different kinds I've seen the top one a 372 clone i saw ads for 72cc and 75cc.
Not available here in the us.

 

[Czed]

Hi Czed,
The sx72 has an outboard clutch, is 372 inboard?
Ray

Post up if you buy one.

 

[Czed]

2 different kinds I've seen the top one a 372 clone i saw ads for 72cc and 75cc.
Not available here in the us.View attachment 98027 View attachment 98028

The bottom one is a chinese design like one i had just bored out bigger
It was a good saw.

 

[Rayman]

Post up if you buy one.

Lol... I have a MTM sx72 in a box just arrived. Will put it together tomorrow and take a few pics. Under instructions to trim a tree so might have to that first.

 

[Czed]

Lol... I have a MTM sx72 in a box just arrived. Will put it together tomorrow and take a few pics. Under instructions to trim a tree so might have to that first.

Thanks
I've got an aussie friend willing to ship me a saw.
Do you know of a reasonable shipping service.
258.00 seems high lol

 

[Rayman]

Looking at manuals and pics the s2 might be a bit of a hybrid. Has a big air filter but the clutch brake cover is like a 272.

 

[Rayman]

Thanks
I've got an aussie friend willing to ship me a saw.
Do you know of a reasonable shipping service.
258.00 seems high lol

That does seem high. Faster is always more expensive, I sent 40 kg the Sth America a few years back for $50 but it took 3 months to get there. I will check a couple of carriers, east or west coast?

 

[Czed]

That does seem high. Faster is always more expensive, I sent 40 kg the Sth America a few years back for $50 but it took 3 months to get there. I will check a couple of carriers, east or west coast?

Thank you very much.
Wv 25271
I've tried e-mailing carriers there no luck.
I did have problem's with the china fuel and impulse lines.
That's something they can't figure out is how to make a good rubber line.
I've had good service out of everything else they make.

 

[Rayman]

Thank you very much.
Wv 25271
I've tried e-mailing carriers there no luck.
I did have problem's with the china fuel and impulse lines.
That's something they can't figure out is how to make a good rubber line.
I've had good serviceView attachment 98030 out of everything else they make.

Is just the line or the filter as well. I will have to get some of the yellow line.

 

[Czed]

Is just the line or the filter as well. I will have to get some of the yellow line.

Filters work great.

 

[Rayman]

Filters work great.

Thanks. Getting late here so I am going to bed. Tomorrow is Sat. so might take a couple of days to get some info...I will get back to you. The MTM SX72 cost me A$129 delivered and I am out of town a bit.

 

[Czed]

Thanks. Getting late here so I am going to bed. Tomorrow is Sat. so might take a couple of days to get some info...I will get back to you. The MTM SX72 cost me A$129 delivered and I am out of town a bit.

7:22 am here lol
Have a good one
Take you're time with the pics
No hurry.

 

[Rayman]

7:22 am here lol
Have a good one
Take you're time with the pics
No hurry.

Just a quick heads up on delivery. Australia Post would charge $137 for 1 saw and $188 for 2. Send & Pack $148 for 1 and $193 for 2. All A$ and 4 days delivery but I would expect that to be a few days more. You can look those carriers up online, they have calculators online.
Also I sent a message to Edison here to see if they would send direct to you. Ended up with a few more jobs to do so saw pics will be a bit later.

 

[Czed]

Just a quick heads up on delivery. Australia Post would charge $137 for 1 saw and $188 for 2. Send & Pack $148 for 1 and $193 for 2. All A$ and 4 days delivery but I would expect that to be a few days more. You can look those carriers up online, they have calculators online.
Also I sent a message to Edison here to see if they would send direct to you. Ended up with a few more jobs to do so saw pics will be a bit later.

Thank you.

 

[Derf]

I might be interested in getting a Baumr 82cc if someone wanted to add another saw to their order and split shipping.

 

[Rayman]

I got a reply from Edison and they said they are not able to ship international yet. That sort of suggests they will in the future. Are you guys sure you can't get these saws local or through Canada or Sth America?

 

[Rayman]

Does anyone have any idea as to what the sx72 is a copy of? Is it a hybrid of husky models or a redmax or jonsered etc It seems to have some 272 design but has a 372 type oiler with adjustment on the bottom of the case. The air filter is large like a 372 but the clutch is outboard like the 272. I'm confused. I can say it runs smoothly and cuts clean and feels good. It leaks bar oil from the adjuster I think. I ran it 40 : 1 not the 25:1 that they suggest. What bar oil are you guys running, I am using a good 10w30 oil.

 

[blackattack]

be careful, that black copy that is allegedly 92cc is a 372 copy, so not 92cc at all.....

I would love to see someone strip down a sx92 and see whats inside that