Another chainsaw dyno...

[John235]

This is by far my favorite thread to read. Thanks Red97 and all who r sending saws.

 

[Red97]

Damn. Gonna hafta drive the work truck down there

6+ boxes if I mathed right.

...reinforcing the stand for the 166....

It's not so much the stand, and the shaft/sprocket in worried about. May twist off the 3/4" keyed shaft.

Sending Joe the 590 he ported that I now own and love.

Awesome! See if it can hang with the other 60cc class

I wanna see a truly strong 7900 on there.

I'm sure one will come along. One was really close to 9hp.

The good Dr. built a MOFO 361 with a moar spinny recipe. Tracking puts it at Joe's tomorrow.

I'll keep a look out.

Gotta be careful, mail lady not gonna be happy with 3 saws in a 05 impala...

 

[MustangMike]

Dom, I figured you would also send your 395! Looking forward to seeing that ported 572.

 

[Deets066]

Awesome! See if it can hang with the other 60cc class

Maybe I should send the 665 too.
Is three saws in a box too much?!?

 

[huskyboy]

The good Dr. built a MOFO 361 with a moar spinny recipe. Tracking puts it at Joe's tomorrow.

I’ll be interested to see what that 361 puts out as I compared it to a bunch of saws I have here... so I should have some rough reference to what power they make as well.

 

[Duane(Pa)]

Joe, I have heard Fastenal does shipping on bulky items. Do you have a Fastenal store anywhere close?

 

[Red97]

Joe, I have heard Fastenal does shipping on bulky items. Do you have a Fastenal store anywhere close?

About 20 miles north, and south.

 

[Cobby08]

This bs is why I stay outta most threads about saws. I've gotten to the point where I just wanna do my job, and avoid insanity.

Up yours... hehe

 

[Cobby08]

There's another one in CNY...
661 Showdown...

Oh yeah I was supposed to ship that too... dammit I suck at this remembering *s-word.

 

[Cobby08]

@Red97 Does it matter what Rim is on it?

 

[Red97]

@Red97 Does it matter what Rim is on it?

3/8×7 is what I have everything set for. If it is an oddball spur, I can change the ratio in the control box to compensate.

Or 404x7

 

[Mastermind]

Up yours... hehe

Thanks Cob Job.

Now I gotta unwatch this thread yet again.

 

[huskihl]

3/8×7 is what I have everything set for. If it is an oddball spur, I can change the ratio in the control box to compensate.

Or 404x7

The 166 has 3/8x8. And I haven’t made the clutch tool yet

 

[Red97]

The 166 has 3/8x8. And I haven’t made the clutch tool yet

I can math it.

Just like the 6t spur on the 2511

 

[TreeLife]

Dom, I figured you would also send your 395! Looking forward to seeing that ported 572.

Gonna be a one at a time dealio for ole Dom

 

[Wolverine]

Joe and I are gonna meet next Sunday. He’s bringing the 572 and @dall ’s saws for me and I’m bringing my Tecomec 365, TM661, a stock 346 and a 166 to run on the dyno

Kevin, we talked about the 365sp I have. Wanna do a before/after dyno on it?

 

[Red97]

Kevin, we talked about the 365sp I have. Wanna do a before/after dyno on it?

Dibz

 

[huskihl]

Kevin, we talked about the 365sp I have. Wanna do a before/after dyno on it?

Up to you. Sounds like fun

 

[CR888]

An interesting saw to dyno would be a piped 6400 Brett (Spencerpaving) build a year or two ago. That saw was viscous!

 

[Wolverine]

Dibz

Would I be able to ship it to Mi once and have it dyno’d then passed off to Kevin? If that’s workable, I’ll get it boxed up. I don’t wanna have 4 shipping bills.