254/346 Hybrid Build “documentation” thread thingy… idk

[ZukiRyder440]

The uppers need some clean u pas well. Had a bunch of casting flash built up in them so I took the RA and took that crap out. And the secondaries had a belly in them… so i flattened them out, granted, having both primaries and the secondaries flat isn’t optimal but itll have to do until I cut the chamber.

 

[ZukiRyder440]

And now we wait for JB weld curing…. Tick.. tock.. tickk tock… haha. Ill get it fired up again tomorrow, and ill get some videos of it too

 

[Powerstroke Cowboy]

What percentage of the bore did you make the intake and exhaust?

 

[ZukiRyder440]

What percentage of the bore did you make the intake and exhaust?

close to 70% on ex pittle over 65 on intake

 

[ZukiRyder440]

Alrighty gentledudes, we got it together again and took it out for some test cuts… all o can say is it runs pretty freaking good for that little bit I did to the cylinder. I moght do a comparison video between my 346 and the hybrid here pretty soon

 

[ZukiRyder440]

After I machined the piston, both measurements were taking off the middle of the piston right on top of where the wrist pin is.
Left one is left side, right one is right side. And i was able to ditch both the spacer and one of my thicker gaskets. Which is freaking sweeettr

 

[ZukiRyder440]

Here she be… im going to compare it to my 346… idk if I feel the need to do machine work on it it runs strong. Ill get a vid of it bucking up some ash in a little bit. But HOLEEE smokes…

 

[Agent Smith]

Even more gooder now

 

[ZukiRyder440]

Even more gooder now

Thank ya!!. I have a new video of me cuttin ash ill post it in a lil bit,

 

[ZukiRyder440]

Here it is in some white ash. It feels pretty close to my 346 but has more torque,

 

[ZukiRyder440]

What do you guys think… run it as is and or say eff it and cut the band?

 

[Ketchup]

What do you guys think… run it as is and or say eff it and cut the band?

Nope. You done good. Build a second one if you want to do more port work. She snorts!

 

[ZukiRyder440]

Nope. You done good. Build a second one if you want to do more port work. She snorts!

Thanks man!! And ive been kinda leaning towards that too.. just run it sorta deal. It feels like its just about in 357 territory power wise,

 

[Chainmale]

Cheers for the thread @ZukiRyder440 .
Good to see it turn out well.

 

[ZukiRyder440]

Thank ya mang I appreciate it!

Cheers for the thread @ZukiRyder440 .
Good to see it turn out well.