066 Handle bar identification.

[cease232]

Trying to sort out some handle bar and brake flag variations. I’ve read Dave’s thread on the subject but how you identify which handle bar you have. The only part number stamped on them is 1122/02, 1122/03, 1122/06 etc.
http://opeforum.com/threads/064-066-ms640-ms650-ms660-handlebar-and-brake-handle-cheat-sheet.3432/


Sent from my iPhone using Tapatalk Pro

 

[jacob j.]

If you have a 3/4 wrap handle, the easiest way is to lay it on your bench, forward facing down. The older style (3603) that is more straight across will lay
almost flush on your bench. The newer angled style (3611) will not sit flush or near flush at all.

 

[cease232]

If you have a 3/4 wrap handle, the easiest way is to lay it on your bench, forward facing down. The older style (3603) that is more straight across will lay
almost flush on your bench. The newer angled style (3611) will not sit flush or near flush at all.

Thanks JJ. That’s exactly what I needed to know. I’ve got one of each. The 3611 works fine with a 9103 flag. I guess I’m stuck finding a 9105 for the 3603 then right?


Sent from my iPhone using Tapatalk Pro

 

[jacob j.]

Thanks JJ. That’s exactly what I needed to know. I’ve got one of each. The 3611 works fine with a 9103 flag. I guess I’m stuck finding a 9105 for the 3603 then right?


Sent from my iPhone using Tapatalk Pro

It depends on which chassis you have - if you're building an 064, then you need 9105. If you're building an 066, then you need 9106.

 

[cease232]

It depends on which chassis you have - if you're building an 064, then you need 9105. If you're building an 066, then you need 9106.

Was destined for an 066 but I wouldn’t mind putting it on my 064 either. Guess It’ll depend on what’s out there.


Sent from my iPhone using Tapatalk Pro