066 Handle bar identification.

[cease232]

Trying to sort out some handle bar and brake flag variations. I’ve read Dave’s thread on the subject but how you identify which handle bar you have. The only part number stamped on them is 1122/02, 1122/03, 1122/06 etc.
http://opeforum.com/threads/064-066-ms640-ms650-ms660-handlebar-and-brake-handle-cheat-sheet.3432/


Sent from my iPhone using Tapatalk Pro

 

[jacob j.]

If you have a 3/4 wrap handle, the easiest way is to lay it on your bench, forward facing down. The older style (3603) that is more straight across will lay
almost flush on your bench. The newer angled style (3611) will not sit flush or near flush at all.

 

[cease232]

If you have a 3/4 wrap handle, the easiest way is to lay it on your bench, forward facing down. The older style (3603) that is more straight across will lay
almost flush on your bench. The newer angled style (3611) will not sit flush or near flush at all.

Thanks JJ. That’s exactly what I needed to know. I’ve got one of each. The 3611 works fine with a 9103 flag. I guess I’m stuck finding a 9105 for the 3603 then right?


Sent from my iPhone using Tapatalk Pro

 

[jacob j.]

Thanks JJ. That’s exactly what I needed to know. I’ve got one of each. The 3611 works fine with a 9103 flag. I guess I’m stuck finding a 9105 for the 3603 then right?


Sent from my iPhone using Tapatalk Pro

It depends on which chassis you have - if you're building an 064, then you need 9105. If you're building an 066, then you need 9106.

 

[cease232]

It depends on which chassis you have - if you're building an 064, then you need 9105. If you're building an 066, then you need 9106.

Was destined for an 066 but I wouldn’t mind putting it on my 064 either. Guess It’ll depend on what’s out there.


Sent from my iPhone using Tapatalk Pro

 

[singinwoodwackr]

It depends on which chassis you have - if you're building an 064, then you need 9105. If you're building an 066, then you need 9106.

Ok, ancient thread…
But…
Will a 9106 work on an 064 with wrap?

 

[jacob j.]

Ok, ancient thread…
But…
Will a 9106 work on an 064 with wrap?

Either a 9106 or a 9104 with a spacer.

The 9105 is the stock brake handle for the straight-across wrap on the 064.

 

[singinwoodwackr]

Either a 9106 or a 9104 with a spacer.

The 9105 is the stock brake handle for the straight-across wrap on the 064.

Ok. I have no idea what 1122 wraps I have
I was going to send David a handle cuz I thought I had a bunch. Turns out, they are all 1128s
I need just one for my 064 build and the 9106 is all I could find

 

[jacob j.]

Yeah a spacer is pretty easy to make. A lot of hardware stores have metric and SAE spacer stock.

 

[singinwoodwackr]

Yeah a spacer is pretty easy to make. A lot of hardware stores have metric and SAE spacer stock.

Where does said spacer go?

 

[jacob j.]

Where does said spacer go?

On the starter side, since the 064 starter is narrower than the 066. I think the 066/660 brake handles are around 10mm wider.

 

[K Mueller]

Goes between recoil and brake handle as the 066 recoil is wider.

I found a nylon bushing at the local hardware store that works well.

 

[jacob j.]

Goes between recoil and brake handle as the 066 recoil is wider.

I found a nylon bushing at the local hardware store that works well.

View attachment 484280

I think a nylon bushing would work best since it would have the least friction.

 

[singinwoodwackr]

On the starter side, since the 064 starter is narrower than the 066. I think the 066/660 brake handles are around 10mm wider.

Ah, that makes sense

 

[jacob j.]

I think this brake handle is correct - even though it says 9102 on the package, it says 9104 on the actual handle:

Pardon Our Interruption...

It looks right anyway from the picture...

 

[singinwoodwackr]

I think this brake handle is correct - even though it says 9102 on the package, it says 9104 on the actual handle:

Pardon Our Interruption...

It looks right anyway from the picture...

I’ve gotten a lot of good parts from them over the years.

 

[jmester]

I think this washer would work well to close the gap between brake handle and recoil.
3003 655 9200
Washer

worked well to use the 880 brake handle on an 084