FOUND IT 066 bits

[K Mueller]

Getting close on this 066 rebuild. Seeking a few parts if anyone has some extras

Plastics plugs for AV buffers
Cover for brake assembly 1122 021 1105 - found
Ground wire
Kill wire
Spring for presence lever
Throttle rod
Brake handle for 3/4 wrap
Decompression valve
Elasto pull cord

 

[K Mueller]

 

[chipper1]

I'll take it .
Looks good buddy.
Unfortunately I don't have to many parts here, and most the parts saws I do have are saws most on here would want nothing to do with, including me.
GLFP

 

[Fruecrue]

Good looking saw!
I may have the brake cover, have to look.

 

[K Mueller]

I'll take it .
Looks good buddy.
Unfortunately I don't have to many parts here, and most the parts saws I do have are saws most on here would want nothing to do with, including me.
GLFP

Thanks Brett

Good looking saw!
I may have the brake cover, have to look.

Ok cool

 

[blacksmith]

Looking good @K Mueller! Sorry can't help you out as Iam in the same boat you right now gathering new parts for my 066 flat top rebuild. I am getting ready to send my cases to Mike for powder coating. I hope mine turns out as nice as yours is.

 

[K Mueller]

Looking good @K Mueller! Sorry can't help you out as Iam in the same boat you right now gathering new parts for my 066 flat top rebuild. I am getting ready to send my cases to Mike for powder coating. I hope mine turns out as nice as yours is.

Thanks!

They will turn out awesome, I haven’t seen a bad one yet from mike!

 

[PA Dan]

Me either... his powder is fantastic! My 066 and deck.

 

[Fruecrue]

The brake cover I have is 1122 021 1100, don’t know what the difference is.
Looks a bit beat up compared to your saw as well.

 

[K Mueller]

View attachment 193074 The brake cover I have is 1122 021 1100, don’t know what the difference is.
Looks a bit beat up compared to your saw as well.

Appreciate the offer but I’m going to hold out for something a little cleaner for this saw. Thank you

 

[blacksmith]

@K Mueller is your 066 a short block? The one that I have that Iam redoing is. What is the part number on your piece? The one that I have is 1122 021 1105. If yours is a short block this is the part number that you will need. This is still available from a dealer I picked mine up for around $15.

If you can't get it let me know and I can get it for you.

 

[K Mueller]

@K Mueller is your 066 a short block? The one that I have that Iam redoing is. What is the part number on your piece? The one that I have is 1122 021 1105. If yours is a short block this is the part number that you will need. This is still available from a dealer I picked mine up for around $15.

If you can't get it let me know and I can get it for you.

Thanks for the heads up. I just found one of them.

 

[blacksmith]

Thanks for the heads up. I just found one of them.

Ok no problem.