064 need suggestions

[Keith Gandy]

I didn't time them.
2.5 or 3 seconds in a what,10 second cut?
That's a gigantic gain over a saw that was already ported,at least I think so.

It's just over 14k but I'll get it broke in and find out where it wants to run

I counted about 12 stock and around 9.5 ported? Heck ya its a good gain

 

[Deets066]

I counted about 12 stock and around 9.5 ported? Heck ya its a good gain

It was ported when J got it, guy tried his hand at porting and didn't do a bad job but wasn't quite satisfied so he sent it to J. He put a new cylinder on it and ported it how he does

 

[Keith Gandy]

It was ported when J got it, guy tried his hand at porting and didn't do a bad job but wasn't quite satisfied so he sent it to J. He put a new cylinder on it and ported it how he does

I see. Ya she ran pretty good in 1st video but really woke on up in 2nd

 

[jmssaws]

I wish I would have weighed to see how much I took off the piston, I ground on it bout as long as I did on the cylinder

 

[Deets066]

I wish I would have weighed to see how much I took off the piston, I ground on it bout as long as I did on the cylinder

Meteor?

 

[jmssaws]

Meteor?

Yeh
They have wide skirts but are way over built

 

[CR500]

All of the 85cc cylinders I do will be right around there.

All seem to be consistently timed compared to a 066/660 lol

Sent from my non internal combustion device.

 

[Keith Gandy]

Workin on my 064 hybrid again. Bumped it from 155 psi to about 200.

 

[jmssaws]

Workin on my 064 hybrid again. Bumped it from 155 psi to about 200. View attachment 40248View attachment 40249 View attachment 40250View attachment 40251 View attachment 40252

If your transfers are right it will be a beast.

 

[Keith Gandy]

If your transfers are right it will be a beast.

Heck it already ran great. I cant see where it wont run better but we will see

 

[jmssaws]

Heck it already ran great. I cant see where it wont run better but we will see

Dido you raise the ports back up?

 

[jmssaws]

Dido you raise the ports back up?

You gained intake so I would

 

[Keith Gandy]

I hadnt Jason. Its 100/123/82

 

[jmssaws]

I hadnt Jason. Its 100/123/82

It will run good there.

 

[David Young]

Aimed toward the roof more, or flatter?

What about this J?

 

[jmssaws]

What about this J?

Neither.
Aimed at the intake more and opened different.

 

[paragonbuilder]

Neither.
Aimed at the intake more and opened different.

What do you mean by opened different?

 

[jmssaws]

What do you mean by opened different?

You know different, as opposed to the same.

 

[jmssaws]

What do you mean by opened different?

You know different, as opposed to the same.

 

[paragonbuilder]

You know different, as opposed to the same.

Well that clears it up! Thanks.