064/056 mag11 build

[junkman]

Do tell.
I need to measure this cylinder

I heard there is a cel phone app to measure the jug off the saw ,it doubles as a tach also .

 

[jmssaws]

I heard there is a cel phone app to measure the jug off the saw ,it doubles as a tach also .

I'll see if I can download it. Lol

 

[paragonbuilder]

I heard there is a cel phone app to measure the jug off the saw ,it doubles as a tach also .

Yeah but ChrisPA won't let OPE members get it... Lol


Sent from my iPhone using Tapatalk

 

[srcarr52]

I wrote my own excel program to do all the calculations from the measurements of the port heights to the squish band. I can even do strato port timing, tell if it's going to free port, if the second ring is going to get into the intake port and estimate cranking compression.

I use a modified dial caliper to measure the ports. It's got a hook ground into the depth side so you can hook the port edges top and bottom and add the known offset to port lower edges.

 

[paragonbuilder]

I wrote my own excel program to do all the calculations from the measurements of the port heights to the squish band. I can even do strato port timing, tell if it's going to free port, if the second ring is going to get into the intake port and estimate cranking compression.

I use a modified dial caliper to measure the ports. It's got a hook ground into the depth side so you can hook the port edges top and bottom and add the known offset to port lower edges.

That is awesome! If you can make it into an iPhone app I would buy it!!!


Sent from my iPhone using Tapatalk

 

[junkman]

lol is this an app for timing ?
http://www.csgnetwork.com/timingportdurationcalc.html

 

[jmssaws]

I wrote my own excel program to do all the calculations from the measurements of the port heights to the squish band. I can even do strato port timing, tell if it's going to free port, if the second ring is going to get into the intake port and estimate cranking compression.

I use a modified dial caliper to measure the ports. It's got a hook ground into the depth side so you can hook the port edges top and bottom and add the known offset to port lower edges.

That's what I'm talking about.
Absolutely have to be more accurate

 

[hseII]

It will tune up in the 14's.

If I didn't fix this one a minute ago then I damn sure didn't hurt it.
Has a completely different sound to it now.
Soon as it cools off some I'll see

I'm waiting.

 

[David Young]

http://opeforum.com/threads/linear-measurement-for-port-durations.838/


Here you go j

Lambretta also has a calc that is even better

 

[jmssaws]

I'm waiting.

It runs better but still has a stumble under a load, it's almost like a light 4stroke all the time,screaming lean or fat it doesn't go away.
I'm baffled

 

[hseII]

http://opeforum.com/threads/linear-measurement-for-port-durations.838/


Here you go j

Lambretta also has a calc that is even better

Is this " The" Young, or another Young?

 

[hseII]

It runs better but still has a stumble under a load, it's almost like a light 4stroke all the time,screaming lean or fat it doesn't go away.
I'm baffled

Maybe it's like the other one with the muffler?

Spitballing on this end.

 

[paragonbuilder]

Is this " The" Young, or another Young?

It is


Sent from my iPhone using Tapatalk

 

[David Young]

Is this " The" Young, or another Young?

I'm Caucasian if that's what you asking

I thought I was French until I went to Belfast. They let me know young is English. But they bought me a baileys just the same.

When I was in Jacksonville there was an entire page of David youngs in the phone book!

I might as well be a smith.

 

[paragonbuilder]

http://opeforum.com/threads/linear-measurement-for-port-durations.838/


Here you go j

Lambretta also has a calc that is even better

I'll check it out better later, but it looks like you enter your squish and it does the math for you [emoji106]
Here is the link
http://lambretta-images.com/archive/porttiming.php


Sent from my iPhone using Tapatalk

 

[hseII]

I'm Caucasian if that's what you asking

I thought I was French until I went to Belfast. They let me know young is English. But they bought me a baileys just the same.

When I was in Jacksonville there was an entire page of David youngs in the phone book!

I might as well be a smith.

Wait, What?

I thought you were Asian?

I didn't just dream that either.

I have been Fooled again.

 

[jmssaws]

Maybe it's like the other one with the muffler?

Spitballing on this end.

Carb and boot will be here in a couple days.
I think it's a blow down problem but ill wait and see after the carb is upgraded.

 

[hseII]

Carb and boot will be here in a couple days.
I think it's a blow down problem but ill wait and see after the carb is upgraded.

Ewe certainly know better than me.

I'm glad you are sticking with it to get all there is. [emoji1474]

 

[RI Chevy]

Unbelievable diligence Jason! Very honorable.

 

[MustangMike]

The success, the frustration, the anticipation ... yea, it's a good thread! Oh yea, and a lot of knowledge too!