064/056 mag11 build

[jmssaws]

I've seen a few that were like that,it was detonating,probably from bad gas.

I have a 066 red light piston somewhere that is eat off to the ring land.

 

[jmssaws]

I ended up cut 020 and 020 to get the transfers down some and gain some intake.

 

[hseII]

I see. You're trying to make me have to ban myself.

Pics of John pulling on that 2100 would suffice.

 

[Mastermind]

Pics of John pulling on that 2100 would suffice.

John don't help me anymore......

 

[hseII]

John don't help me anymore......

10-4.

I hope you've got a plan to start that one.

If you need to wait a bit, I understand.

Don't reinjure your biness.

 

[Mastermind]

10-4.

I hope you've got a plan to start that one.

If you need to wait a bit, I understand.

Don't reinjure your biness.

I'll get my wife to start it.

Jon is working third shift at a plastics molding place. He's doing pretty damn good. He works three on, two off, two on, three off. Weird schedule to me. I think he might start helping me again two days a week. I hope so anyway........I miss him.

 

[Glock37]

I see. You're trying to make me have to ban myself.

Rope pulling ! lets see the goat roping


Sent from my iPhone using Tapatalk

 

[hseII]

I'll get my wife to start it.

Jon is working third shift at a plastics molding place. He's doing pretty damn good. He works three on, two off, two on, three off. Weird schedule to me. I think he might start helping me again two days a week. I hope so anyway........I miss him.

I'm Sure You Do.

He seems to be real good help, and that's hard to find.

I'm Sure She can handle it.

 

[Toad22t]

I'll get my wife to start it.

Jon is working third shift at a plastics molding place. He's doing pretty damn good. He works three on, two off, two on, three off. Weird schedule to me. I think he might start helping me again two days a week. I hope so anyway........I miss him.

It's good that you stood your ground though Randy! It hopefully showed him that you care that much for him.

 

[Redfin]

Welding spatter.

Yeah saw that after I replied. What were you welding on?

 

[jmssaws]

I need a full time guy who will work for almost free that handy with saws.

It will take as long to make a muffler work as it did to do everything else.
A guy that could have that stuff done and waiting would be invaluable and by invaluable I mean nearly 30$ a day,
Seriously though I need to hire someone but im afraid I would still do everything because I'm kinda picky and ocd about stuff.

I'm done grinding and working on a muffler now.
Hopefully compression don't get me,I'd like it less than 200

Anybody know what ring gap should be?

 

[junkman]

Why?

Looks like @Brush Ape 's logo Hmmm

 

[Adirondackstihl]

Yeah saw that after I replied. What were you welding on?

Not me.
Wife's uncle.
He decided to weld the muffler brace to the muffler......but never took the muffler off the saw. Why? I think the brace was broke.
Anyway....
He says to me, "I think it's getting tired, can you rebuild the carb for me"?

LOL......sure

 

[hseII]

Not me.
Wife's uncle.
He decided to weld the muffler brace to the muffler......but never took the muffler off the saw. Why? I think the brace was broke.
Anyway....
He says to me, "I think it's getting tired, can you rebuild the carb for me"?

LOL......sure

Yeah for the Squirt Gum.

 

[hseII]

I need a full time guy who will work for almost free that handy with saws.

It will take as long to make a muffler work as it did to do everything else.
A guy that could have that stuff done and waiting would be invaluable and by invaluable I mean nearly 30$ a day,
Seriously though I need to hire someone but im afraid I would still do everything because I'm kinda picky and ocd about stuff.

I'm done grinding and working on a muffler now.
Hopefully compression don't get me,I'd like it less than 200

Anybody know what ring gap should be?

Video?

 

[Mastermind]

Jason, which thread were we talking carbs in bro?

 

[jmssaws]

Jason, which thread were we talking carbs in bro?

69 clone thread

 

[jmssaws]

 

[junkman]

How are the timing #s stock compared to modern saws ?

 

[laslabjohn]

Wow that's perty!!