064/056 mag11 build

[jmssaws]

 

[jmssaws]

How are the timing #s stock compared to modern saws ?

It was 100.5 118 74

 

[spencerpaving]

Did you give it a tonsillectomy on the intake?

 

[mdavlee]

Thats what I would want, if I were to have one done.

Maybe somethin' like this by @srcarr52 ...

View attachment 29247 View attachment 29248

You could build a head and put the plug on an angle. I don't know how much meat is there to move the plug to a stock location.

 

[Frank bierce]

View attachment 29295 View attachment 29296

Looking very nice!!!

 

[jmssaws]

Did you give it a tonsillectomy on the intake?

No it still has both rings but it may not have after while.
Fixing to run it

 

[Chainsaw Jim]

I got this in trade for a replacement HS carb a couple weeks ago. I suppose I now know what I'm going to use for the 80-100cc class at the next race.

 

[jmssaws]

Carb boot is at a bad angle and runs good till you hit the wood then it sucks the boot shut.
I'm gonna trying a couple different ones when it cools off

 

[spencerpaving]

Carb boot is at a bad angle and runs good till you hit the wood then it sucks the boot shut.
I'm gonna trying a couple different ones when it cools off

I run a 460 boot...a little small but runs well...A 660 boot is stretched to much...it would be nice to find one that fits better

 

[Adirondackstihl]

I run a 460 boot...a little small but runs well...A 660 boot is stretched to much...it would be nice to find one that fits better

661?

 

[spencerpaving]

661?

It's a angle of the dangle thing....

 

[Redfin]

661?

With a rubber washer?

 

[jmssaws]

My dangle has to much angle

 

[Toad22t]

Jason can you post a top view pic of the 064/066 boot installed or with no boot installed?

 

[hseII]

My dangle has to much angle

Mine Too.

Kinda Like a Street EL.

 

[jmssaws]

Jason can you post a top view pic of the 064/066 boot installed or with no boot installed?

I got one on it that's better

 

[jmssaws]

 

[hseII]

You have the rest of this saw.

That's what happens when a few balls of welding spatter gets in the cylinder.

That picture had a familiar feeling to it.

 

[jmssaws]

I believe I have the boot situation handled,I'll find out in the morning.

I'm also going to take a look at a 395 piston, I don't like the 056 one,wrist pin seems to be loose in it which can't be good.

 

[MustangMike]

Changing the plug on Bret's saw is easy, you just pull the pin on the grenade and it comes right out!

Of course, trying to start it will put Randy back on injured reserve!