SELLING Sears Craftsman Branded Poulan 3300

[dieselfitter]

Black Beauty
For sale, lightly used 54cc Craftsman. Unmolested, all I did was clean it up and sharpen chain.
$175 plus shipping. I have it for sale locally and expect it will sell for $175. The guy that buys it will likely use it for what it was designed, work. Because of the condition, I thought maybe someone might rather have it in their collection.

 

[dieselfitter]

I'm located in Hugo MN The saw starts and runs as it should. The only flaw I have noticed is a small puncture in the backside of the air filter and some shelf rash on the bottom.

 

[jk14]

View attachment 141205 View attachment 141206 View attachment 141207 View attachment 141208 Black Beauty
For sale, lightly used 54cc Craftsman. Unmolested, all I did was clean it up and sharpen chain.
$175 plus shipping. I have it for sale locally and expect it will sell for $175. The guy that buys it will likely use it for what it was designed, work. Because of the condition, I thought maybe someone might rather have it in their collection.

Nice looking saw, I love the blue and black color scheme on those saws. They're real good runners too.

GLWS Tim

 

[dieselfitter]

Thanks Jeff. I'm sure it will sell. Comin up on firewood season. I sold 2 saws yesterday and another today. I've been preparing for this time of year.

 

[dieselfitter]

Any boat owners needing an anchor? I just got this MS880 with 59" bar and chain. I got to do carb work before i post it. It sat. Turns out most people don't need a 120cc saw every day.

 

[Dub11]

Thanks Jeff. I'm sure it will sell. Comin up on firewood season. I sold 2 saws yesterday and another today. I've been preparing for this time of year. View attachment 141219 View attachment 141220 View attachment 141221

Daaaaamn! Are all those coming up for sale?

 

[dieselfitter]

Daaaaamn! Are all those coming up for sale?

The Jred 2149 isn't for sale. Doing a local build-off with friends on that one.
The JDcs52, Stihl MS290, 026, Husky 2100 562, Dolmar 510,Jred fire rescue saw are sold.
The 365xp special, 372xp non-xtorq, CS62, Dolmar 5105 and others are for sale. Comin down the pipeline is another Husky 562, a few 261's, Jred 625 and 670 converted to 272 and the MS880.
I need some Stihl 026/ms260's to re-sell.

 

[Armbru84]

Any boat owners needing an anchor? I just got this MS880 with 59" bar and chain. I got to do carb work before i post it. It sat. Turns out most people don't need a 120cc saw every day.
View attachment 141222 View attachment 141223

They run dang nice with a 24” bar I hear.

 

[Armbru84]

Sweet looking saws!!

 

[Cut4fun]

If that saw has the original 54cc chrome bore cylinder with 3450 330 piston. It is actually like a poulan 335 predator that came in red.
They are my go to small saw now.

Poulan 3300 was a bare bore and chrome piston.

Thread on them when I was learning and searching. http://chainsawrepair.createaforum.com/poulan/craftsman-3-3-sears-best/

 

[67L36Driver]

They run dang nice with a 24” bar I hear.

No earthly reason to run anything shorter than 30” on them. [emoji848]

The J-red 625 & 670, trade for 026?

Or a volume deal with a 200T?

 

[Wagnerwerks]

If that saw has the original 54cc chrome bore cylinder with 3450 330 piston. It is actually like a poulan 335 predator that came in red.
They are my go to small saw now.

Poulan 3300 was a bare bore and chrome piston.

Thread on them when I was learning and searching. http://chainsawrepair.createaforum.com/poulan/craftsman-3-3-sears-best/

View attachment 141301

I've had 3 of these but never a black saw with a chome bore. Did you ever have one that way? I know you've had a bazillion more of these than I have..... Just curious.

 

[Cut4fun]

I've had 3 of these but never a black saw with a chome bore. Did you ever have one that way? I know you've had a bazillion more of these than I have..... Just curious.

I have seen the black with gold have bare bore. Seem to be 50/50 on these.

Green 3300 all bare. All the Grey have been bare too for me.

The 4 in pic I posted is mine black with blue and all chrome bore. If that is what you are asking.

 

[dieselfitter]

If that saw has the original 54cc chrome bore cylinder with 3450 330 piston. It is actually like a poulan 335 predator that came in red.
They are my go to small saw now.

Poulan 3300 was a bare bore and chrome piston.

Thread on them when I was learning and searching. http://chainsawrepair.createaforum.com/poulan/craftsman-3-3-sears-best/

View attachment 141301

Cool. Never heard of one. You got any pics?

 

[dieselfitter]

I'll pull the muffler and check if the cylinder is chrome or alum. I'm gonna open up the muffler a bit while I'm at it.
I got my 261's done and ready to sell. One got a Meteor 262 piston. There was nothing wrong with the original piston. It was worth the $30. Quite a difference.

 

[Cut4fun]

Cool. Never heard of one. You got any pics?

2 threads have the pics of it. I seen the saw but I didnt buy it years back, but Roger did. http://chainsawrepair.createaforum.com/poulan/poulan-predator-335/

 

[dieselfitter]

2 threads have the pics of it. I seen the saw but I didnt buy it years back, but Roger did. http://chainsawrepair.createaforum.com/poulan/poulan-predator-335/

View attachment 141416 View attachment 141417

Thanks for the pic. I'm planning on building a multi color 60cc version. I don't have any red parts.

 

[Bbintwn]

What about that Jred 930 is it for sale ?

 

[dieselfitter]

What about that Jred 930 is it for sale ?

I'll consider it. Treemonkey ported it. It's really fast.

 

[Bbintwn]

I'll consider it. Treemonkey ported it. It's really fast.

shoot me a pm if you decide you want to sell it and we’ll give her a discussion