Mastermind Meets The Husqvarna 572XP

[Wolverine]

Sorry for your loss Randy.


Been about 20 some years since we had to put this one down. I still frequently think about her. Never found a decent dog since, none seam to measure up. I’ve been eyeing Dobermans lately. Might be time to try again. I loved the vocals, Husky’s can almost hold a conversation w/ ya. It’s entertaining.

 

[Stihl working Hard]

I get em for 915 EU + the ride.

That’s a great price

 

[Armbru84]

Knock knock.

 

[Willard]

572XP project gone to the dogs?

 

[chipper1]

Knock knock.

Hello.

 

[Stihl working Hard]

Hello.

What’s happening Brett hope your keeping outa trouble

 

[Wolverine]

Knock knock.

 

[chipper1]

What’s happening Brett hope your keeping outa trouble

Good Todd.
You know I try .

 

[MG porting]

 

[Leafy]

Wake me when the thread gets back on topic .

 

[TreeLife]

Wake me when the thread gets back on topic .

Qtla...had any time to fiddle with the saw, Randy?

 

[huskyboy]

Bump

 

[Mastermind]

Sorry fellers. I lost all the pictures I had on my phone.....sorta got bummed out and stuff.

I've learned a lot from this saw though.

To put it in simple terms. It's a bigger, more well thought out 562XP.

 

[tree monkey]

slacker

 

[Dub11]

Sorry fellers. I lost all the pictures I had on my phone.....sorta got bummed out and stuff.

I've learned a lot from this saw though.

To put it in simple terms. It's a bigger, more well thought out 562XP.

Dont feel bad, it's just some metal covered in paint a.d what not. Pretty sure everyone knows what looks like

 

[Armbru84]

Sorry fellers. I lost all the pictures I had on my phone.....sorta got bummed out and stuff.

I've learned a lot from this saw though.

To put it in simple terms. It's a bigger, more well thought out 562XP.

Anything that you really like on it or that was interesting? I didn’t get far enough under the plastic to really see much besides the filtration.

 

[Mastermind]

slacker

True Story

Anything that you really like on it or that was interesting? I didn’t get far enough under the plastic to really see much besides the filtration.

The thing I like the most about the saw is the seal between the intake and the case/carb floor.

It's a soft rubber material that doesn't need anything done to it when lowering the jug.

To take .040 or so off the base, there's only one place on the case that needs to be clearanced.

 

[Mastermind]

I used an extra piston Cole sent me to try different numbers and ideas on before I settled on the "recipe" I wanted to go with.

Then I cut the squish, and ported the jug.

I'm gonna let @T.Roller test it out today to see if he likes the new recipe.

 

[MG porting]

I used an extra piston Cole sent me to try different numbers and ideas on before I settled on the "recipe" I wanted to go with.

Then I cut the squish, and ported the jug.

I'm gonna let @T.Roller test it out today to see if he likes the new recipe.

Now we know what T Roller was talking about last night on a different thread. Lol. Busted T Roller!!!

 

[TreeLife]

Interested in the results, cant wait!