danimal
Pinnacle OPE Member
- Local time
- 7:49 PM
- User ID
- 1152
- Joined
- Apr 12, 2016
- Messages
- 1,122
- Reaction score
- 3,223
- Location
- Armpit of da Midwest
Ok sawtroll Jryou just have the wrong brand saw is all
Damn rightNahhhh, 288 cares not.
Are you shure that is a tree? Looks like it has trees growing from the tree. Yeah thats a big old burr.
That's plenty of saw
Wondering what the piltz race kit would do on thatThat's plenty of saw
Word. Tip can *f-word with the big endI hope your saw is ported.
I would start at the smaller end, and do the trunk section after it is on the ground, less likely to pinch your bar, and can be rolled so you can finish the cut.
Be careful when it shifts.
CHIT!you just have the wrong brand saw is all
Stand it back up and drop it again lol I've had a few stand back up on meI hope your saw is ported.
I would start at the smaller end, and do the trunk section after it is on the ground, less likely to pinch your bar, and can be rolled so you can finish the cut.
Be careful when it shifts.
ReppedAll me saws are hotrodded.
I did a bore cut to see if its solid or hollow. Its solid! I limbed it in an hr, wiff a ported ms360-fyi dall... Farmer spose to push da brush for me, then I will start at da top and work my way south..
Pr o 288's n a 390 will gitter dun!
Can you say noodle fest!
Hey dall,, I would use a 660 on it if I had one. Make a good block to keep it off da ground while I noodle...
Anti-Sawtroll...Ok sawtroll Jr