Worst Chain You Have Seen

[WillG]

View attachment 229303 View attachment 229304

How'd that happen?

Sent from my E6910 using Tapatalk

 

[SOS Ridgerider]

Okay you are winning so far, that chain is *frenched.

Lol. It came in to be square ground. I told him I’d round file it and replace the broken tooth.

 

[SOS Ridgerider]

How'd that happen?

Sent from my E6910 using Tapatalk

He told me he hit something in the wood. Can’t remember exactly what it was.

 

[WillG]

He told me he hit something in the wood. Can’t remember exactly what it was.

That must have been a surprise when he hit it!

Sent from my E6910 using Tapatalk

 

[Xr650jkallen]

One of my older buddies at work set this on my desk for me to sharpen. Poor saw.

 

[OldJack]

Miami nun uses chainsaw to clear Hurricane Irma debris

Would someone please buy the good Sister 2 new chains?

 

[chipper1]

Miami nun uses chainsaw to clear Hurricane Irma debris

Would someone please buy the good Sister 2 new chains?

How many chains were hurt in the making of that video, nun.
There's a reason they put it in the closet lol.

 

[TheDarkLordChinChin]

A few months back I volunteered to cut up some noble fir logs for a neighbour using his saw.
Noble fir is very soft and I have cut it easily with a dull but not damaged chain when I needed to.
The chain on his saw simply rubbed up against the wood and did not bite at all.
The chain on his ms 391 was DESTROYED. He had only sharpened it once, with an ANGLE GRINDER. (flashbacks to the Ironhorse threads). He even tried to sharpen the cutters like a knife or axe blade, starting on top of the cutter behind the leading edge and working his way toward the edge. It looked exactly like his chain had gone straight into stainless steel or glass or something. Technically it had lol.

Long story short I spent 45 minutes fixing his chain with a previously un-used 13/64 round file (I prefer 7/32) and 10 minutes cutting the logs.
He said he didnt know his saw could cut that fast.

 

[Nutball]

You weren't clued in by the condition of the bar? I don't know how he could have cut at all let alone slowly.

 

[TheDarkLordChinChin]

He thought it was normal.
Needless to say the bar looked like it was some old logger's heirloom from the "good 'ole days".
He had only had the saw and the bar for a year or two and used maybe 10 tanks.

 

[Nutball]

It makes you wonder how he forgot how fast it was in the first cut, unless he started out by letting it fast idle cutting the ground.

 

[Vice]

Miami nun uses chainsaw to clear Hurricane Irma debris

Would someone please buy the good Sister 2 new chains?

The lord giveth and the lord chainith away. That must be devil wood, hard stuff

 

[TheDarkLordChinChin]

Definitely not an old testament chainsaw.

 

[chipper1]

Definitely not an old testament chainsaw.

Right, they used sharp swords lol.