Which sprocket for an 026

[luckydad]

I got this bar to run on my 026 and need the sprocket to match. Can anyone lead me in the right direction ??


Sent from my iPhone using Tapatalk

 

[Gunn]

8 tooth sprocket if you're planning on running PS.

 

[luckydad]

Part number ??


Sent from my iPhone using Tapatalk

 

[Gunn]

Stihl are Nla as far as I know. Dansco makes an after market one though. Paging @Definitive Dave

 

[fearofpavement]

That's an unusual chain for an 026. They usually run .325. A lot of the Picco chain is in .043 gauge but that bar says .050 so I guess it's just normal 3/8 Lo Pro? So you need a 3/8 sprocket in "mini" size.

 

[Canadian farm boy]

Stihl sells a 3/8 picco 7 pin sprocket in mini spline drive. I have one. I'm not sure the PN. All it says on the sprocket is P-7.
If you want full chisel Stihl chain for that bar you will need 63PS or 63PS3. 60DL.
The PS is regular chisel. The PS3 is also chisel but is safety chain with the bumper links.

As a side note my ported 260 is faster with a 7pin rim then it is with a 8pin

 

[odin]

I've been chasing around to get similar parts for my 024s project. I believe the entire clutch assy. kit for running 3/8 Picco on the 260 is 1121-007-1039. It should be available through your dealer. The 3/8P 7T rim is 0000-642-1240. If your dealer cannot get these, Bailey's has them -

http://www.baileysonline.com/Chains...TIHL-RIM-SPROCKET-MS7-375-X-7-TOOTH-PICCO.axd

 

[odin]

Oh yeah, check with forum member fordf150 for 63PS or 63PS3 (60DL). Best prices I've seen yet and a solid guy to boot.

 

[luckydad]

Thanks for the help guys. I really appreciate it.


Sent from my iPhone using Tapatalk

 

[94BULLITT]

IMO a 8T picco sprocket is too much for a stock 026. Your dealer probably has the 7T picco sprocket in stock.

 

[luckydad]

IMO a 8T picco sprocket is too much for a stock 026. Your dealer probably has the 7T picco sprocket in stock.

10-4 thanks
This little 026 ain't stock tho [emoji41][emoji41]


Sent from my iPhone using Tapatalk

 

[huskihl]

10-4 thanks
This little 026 ain't stock tho [emoji41][emoji41]


Sent from my iPhone using Tapatalk

Neither is CFB'S ^^^^

 

[Deets066]

10-4 thanks
This little 026 ain't stock tho [emoji41][emoji41]


Sent from my iPhone using Tapatalk

The picco sprockets are bigger than normal 3/8's sprockets. An 8 pin picco is huge

 

[Duane(Pa)]

^^^^^^True^^^^
I think the 7 keeps a ported saw in it's power band rpm better than the 8 ymmv?

 

[luckydad]

The 7 pin is what I really want [emoji106][emoji106]


Sent from my iPhone using Tapatalk

 

[94BULLITT]

My 261 runs a 8 great but it is little too much for my 026.

Sent from my GT-P3113 using Tapatalk