What's on your bench?

[Definitive Dave]

That kart saw easily pulls a 42” bar n chain its all a matter of giving the beast the proper gearing for the job at hand.
Heck it even cuts through aluminum like warm butter. Vroom

 

[T.Roller]

101B Kart motor. Those are factory weights used on all the 123cc Mac's.
I was changing the rim and tapped on the crank to remove clutch. Then
went to start it and it was locked up. Never tap on one of those cranks.
I should have known cuz I did it once before.

Is the clutch on a cp125 threaded?

 

[Dub11]

What you see is what i get and it is 3 phase

Still getting it?

 

[usmcbuckwild]

Still getting it?

Hopefully. I will see next week; don’t want to jinx it with too may details.

Contacted LeBlond and narrowed it down to a 15” Dual Drive. The current owner is trying to track down the actual serial number as LeBlond has excellent records.

 

[beaglebriar]

Hopefully. I will see next week; don’t want to jinx it with too may details.

Contacted LeBlond and narrowed it down to a 15” Dual Drive. The current owner is trying to track down the actual serial number as LeBlond has excellent records.

That's a good size lathe. Any idea what it weighs?

 

[usmcbuckwild]

In other news, the 7900 is up and running. It is pretty stout! I am kind of miffed that the HD filter kit I ordered showed the gloss cover but arrived with the matte cover. Looks goofy.

With a borrowed 32” bar:


With a 24” in front of the 394 with 32” bar


I opened up the muffler to 100% under the stock deflector. Should I go ahead and dual pipe outlet it?

 

[usmcbuckwild]

That's a good size lathe. Any idea what it weighs?

The shipping estimate is 3,500 lbs but info I have found is roughly 2,400 lbs.

 

[beaglebriar]

The shipping estimate is 3,500 lbs but info I have found is roughly 2,400 lbs.

I bought a press off a guy that has one of those similar in size. It looked like a very stout machine.

 

[Lee H]

Mike the 166 is definitely a strong saw and I love the way it came out but the
Mac is a different animal. Never tried them side by side but I would put my
bet on the Mac.

 

[460 magnum]

In other news, the 7900 is up and running. It is pretty stout! I am kind of miffed that the HD filter kit I ordered showed the gloss cover but arrived with the matte cover. Looks goofy.

With a borrowed 32” bar:
View attachment 122135

With a 24” in front of the 394 with 32” bar
View attachment 122136

I opened up the muffler to 100% under the stock deflector. Should I go ahead and dual pipe outlet it?

Liking that 7900

 

[usmcbuckwild]

I bought a press off a guy that has one of those similar in size. It looked like a very stout machine.

Everything I have read has stated its a top notch piece of equipment.

 

[usmcbuckwild]

Liking that 7900

Thanks!

 

[Dub11]

The shipping estimate is 3,500 lbs but info I have found is roughly 2,400 lbs.

Are you shipping it through Fastenal?

 

[usmcbuckwild]

Are you shipping it through Fastenal?

No! Its about 2 hours away, i’ll pick it up with the trailer.

 

[huskihl]

Didn't clean up too bad

 

[460 magnum]

View attachment 122212 View attachment 122213


Didn't clean up too bad



View attachment 122214 View attachment 122215 View attachment 122216

Cleaned up dang nice

 

[huskihl]

Cleaned up dang nice

Got it all put together and it's missing the muffler and bolts

So I'm on to @Roadfxr's MS241 tomorrow

 

[Dub11]

Got it all put together and it's missing the muffler and bolts

So I'm on to @Roadfxr's MS241 tomorrow

Mufflers are over rated.

 

[tickbitintn]

Mufflers are over rated.

WHAT???
SAY AGAIN...

lol...

Sent from my XT1635-01 using Tapatalk

 

[dustinwilt68]

Odd yours came matte and I just got mine last week and it is gloss and mine doesn't match