What's on your bench?

[Mastermind]

Autotune day again.

 

[Duane(Pa)]

Autotune day again.

View attachment 46871

I like the fuel window...

 

[Mastermind]

I like the fuel window...

I like the 550XP. It's a great saw.

 

[Mark71gtx]

My friend's Jonsered 2094 Turbo. The guy that "rebuilt" the saw for his grandfather sealed everything up with red RTV... The piston is split! I am assuming the squish was too tight?

 

[Mastermind]

My friend's Jonsered 2094 Turbo. The guy that "rebuilt" the saw for his grandfather sealed everything up with red RTV... The piston is split! I am assuming the squish was too tight?View attachment 46880

That saw is suppose to have an isolator heat shield type gasket under the jug. Without it the piston was probably hitting the squish band.

 

[Mark71gtx]

That is what I was thinking. I remember having to use one when I rebuilt my 2095. The damage is pretty bad. I have contacted the owner. Waiting to see what he wants to do. The saw is wearing a 16" bar! I know it wasn't overworked...

 

[Mastermind]

I'd be surprised if the crank ain't ruined.

 

[Frank bierce]

My friend's Jonsered 2094 Turbo. The guy that "rebuilt" the saw for his grandfather sealed everything up with red RTV... The piston is split! I am assuming the squish was too tight?View attachment 46880

Ouch...I bet that was a noisy running saw!!

 

[Mark71gtx]

I am with you on the crankshaft probably being toast. I talked with the owner. He said it is mine now. I guess it will get in line with the rest of the projects, lol... Does the 2094 share a crank with a 395?

 

[Stump Shot]

Synchronizing carbs today.

 

[Czed]

Autotune day again.

View attachment 46871

I wouldn't know what to do with myself working on a clean saw to begin with.

 

[Mark71gtx]

I wouldn't know what to do with myself working on a clean saw to begin with.

Ain't that the truth! I have had one clean saw cross my bench. It was an 044 that is still stored in it's original case. The owner lets it cool down and wipes it off every time before putting it back in it's case. I know he thought I was nuts since I was saying so many nice things about his saw. It just needed a spark plug and a carb kit. I told him it was such a pleasure working on that saw that it was free. He gave me $50 anyway. (The whole drop off and pickup was through his son in law that I worked with). He has since sent me work through his friends and family.

 

[beaglebriar]

Finally got the top cover and a few other small parts for the 346. Base gasket delete is all I've done to it so far.

Darn thing is almost too pretty to use.

 

[Duane(Pa)]

Finally got the top cover and a few other small parts for the 346. Base gasket delete is all I've done to it so far.

Darn thing is almost too pretty to use.

I feel your pain.... Now get out there and blow chips.

 

[beaglebriar]

I feel your pain.... Now get out there and blow chips.

I'd like to do a little shootout between this my 353 and 488 to see how they stack up. Not sure when I'll get to that though.

 

[Czed]

I'm probably bad for the environment a logger supposed to bring me a 394 if it's as bad as filthy as the last saw ill take pics.

 

[beaglebriar]

Thanks but the owner died and his son is going to take one off of the dead saw pile for it. he was a logger do you happen to know what size fuel line it takes i thought I'd have it but i don't.

I used echo 3mm x 5mm on my 930. Should be the same as your 920??

I'll send you a piece to try just shoot me a PM with your info.

 

[Czed]

Thank you for the offer that's very nice of you. but I've got a 25ft roll of echo 3mm x 5mm I've used it on 371 372 288s but it's just a little small i found some tygon locally for now and ordered a 25ft roll of 3mm x 6 mm should do the trick.

 

[Czed]

I've had trouble with tygon or imitation tygon can't tell the difference anymore even saw it in tygon marked boxes. so i switched to echo years ago love it but my last rolls of "echo" line came in rotary boxes still good stuff but i have no idea who makes it.

 

[Czed]

Ordered some off of amazon to try out i'll post pics.