What's on your bench?

[cowroy]

I put a carb kit in a Shindaiwa 695 yesterday (LUV IT!)
Modded this 18" Forester k095 today to fit the k041 488.
5oz lighter than the solid Tsumura that was on it.
I think it a little better balanced than the Tsumura.

View attachment 410390

Would you mind to share a picture of that bar mod please? I tried doing it to a different setup and it didn’t work very well.

 

[Woodwackr]

View attachment 410912

View attachment 410913

Just shoot me now...

Lol, you win

 

[Partner]

View attachment 410912

View attachment 410913

Just shoot me now...

First, sign that you are giving it to me

 

[Gullet]

Would you mind to share a picture of that bar mod please? I tried doing it to a different setup and it didn’t work very well.

Sorry, just saw this.
I just used a chain file to remove material up to the bottom of the chain rail.
Works excellent.
Tsumura k095 to k041:

 

[Squareground3691]

Got the 405 Plus, back together, New Nos full wrap, new thin rings , new gaskets, few other goodie’s just fired it up ,

 

[Gullet]

Got the 405 Plus, back together, New Nos full wrap, new thin rings , new gaskets, few other goodie’s just fired it up ,

^^^ Friggin SWEET!
It was made in my home state.

 

[Squareground3691]

^^^ Friggin SWEET!
It was made in my home state.

There awesome

 

[Partner]

Metabo W6 burnt rotor became an organ donor The second one is also from Germany, they are nice because they are the smallest and so precise

 

[Ronie]

Mild port job on a 372 cylinder I finished up this past week.

 

[Ronie]

Now I can get back to wiring up my plasma table.

 

[Gullet]

Poulan 3300 new OEM crank seals, Caber ring... yada, yada...
LOTSO new oem parts going into this one!

 

[Gullet]

^^^^ I gave $10 for that saw.
It was missing the clutch cover & had a 14" Oregon bar with 3/8lp chain just so it would sell. Lol
I bought a clutch cover for $25 on fleabay & put new fuel lines & duckbill valve in it & cut about 20 ricks of wood with it. Lol
Carb started messing up, so I started gathering parts for it over the last 4-5 months.
I have another one (both chrome bores) that I've owned for over 20 years & never had a single problem with it.
Kinda sux owning 2, cause I tend to buy 2 of every part I buy! Lol

 

[stretch5881]

I finished my wife's work bench today. What's on her bench? A small sampling of valor quilts that she has been involved with making.

 

[Gullet]

Damn nice work bench!

 

[stihl livin]

I finished my wife's work bench today. What's on her bench? A small sampling of valor quilts that she has been involved with making.View attachment 411170

My father in law just made my wife a bench for her quilting room. We have 2 old wooden ladders in the living room to hang quilts on she has so many. That is a beautiful bench you made

 

[Czed]

Can am maverick 1000 belt exploded

Easy fix just thread one bolt in the cvt
And it spreads it apart and slap a new belt in.

 

[Woodslasher]

A buddy asked me to give his 350 a once-over since it had sat a bit. A quick look showed the decomp was missing the button, it had the intake clamp of death, and the muffler was working loose. An hour or so later and the decomp is plugged, it has the updated clamp, a muffler shield, and a 346 muffler bracket and is ready for service again. If it was mine the dished piston would go, but I didn't have one handy and he'll need it soon.

 

[Woodslasher]

Once I was done wrenching I decided I should probably clean up my bench:

 

[Woodwackr]

Once I was done wrenching I decided I should probably clean up my bench:
View attachment 411560

Compared to mine, that is pristine.

 

[Woodwackr]

Handle repair day
Friend down the street wanted to use my TIG...that I have yet to master...
Sure! Once you get your stuff done, can you look at a couple busted wrap handles?
3 junk handles are now usable, wee! 2100, 266-272....
He does Magnesium as well...hmm...

He's a retired pro industrial welder, lol

Now, I just need to get him to teach me