What's on your bench?

[usmcbuckwild]

I have done it lol



Ma Deuce for tree dropping snags and heavy leaners. It makes sense in my head.

No, no, NO! MK19 for heavy leaners or snags. Have you learned nothing, BOOT?

 

[drf256]

Workin on the 603

 

[usmcbuckwild]

Workin on the 603View attachment 136526 View attachment 136527 View attachment 136528 View attachment 136529 View attachment 136530

Jealous

 

[Red97]

Been playing with the new "bench" well table anyway.

 

[RI Chevy]

I have an HD 50 here with a 70 jet from factory.

I will call again to verify. You have HD50A?

 

[Dub11]

No, no, NO! MK19 for heavy leaners or snags. Have you learned nothing, BOOT?

How much?

 

[Redfin]

I will call again to verify. You have HD50A?

 

[RI Chevy]

Stock or did someone bump up the jet?

 

[Redfin]

Stock or did someone bump up the jet?

You funny Guy Jeffy.

 

[RI Chevy]

Lol. Just asking so when I call, I got correct information.
I will take it that the carb came on a stock 461.

 

[Redfin]

This carb came in a little white box.

 

[Redfin]

Used it on my high bread. Runs almost identical to an HD11.

 

[Sty57]

Used it on my high bread. Runs almost identical to an HD11.

Are they a bolt on or do you have to change the shafts?

 

[Cut4fun]

He finally showed up with $ yesterday.
Bye bye my fav rear handle trim saw for last 7-8 years. I ran a 12" 3/8LP picco set up myself.
Back to oem 325 set up now with a new loop of rs.
Guy needed something on a budget after burning his throw away saw up. Cost more to repair then worth.
So I set this up for him and cut it from the herd.

 

[Canadian farm boy]

Are they a bolt on or do you have to change the shafts?

To use the HD50 you either have to change the choke shaft with one from an HD16 or HD17 or you can change the master control lever with one from a ms461.

 

[MG porting]

Workin on the 603View attachment 136526 View attachment 136527 View attachment 136528 View attachment 136529 View attachment 136530

Very nice muff mod. Question for you I haven't tried it yet but I'm thinking about it but I'm wondering if you can use silver Souder for muffler mod deflectors?

 

[MG porting]

Been playing with the new "bench" well table anyway.

Looks like you are having fun.

 

[Sty57]

To use the HD50 you either have to change the choke shaft with one from an HD16 or HD17 or you can change the master control lever with one from a ms461.

So #12 is all you gotta change?

 

[Canadian farm boy]

So #12 is all you gotta change?

View attachment 136574

You change #12 out for one from a 461 or if you have the original walbro carb that came on the 044 you can change the choke shaft in the carb.

 

[drf256]

MOFOing (?verb) the 603 still.

Gotta add a baffle so Simon’s ears don’t bleed and opened the air box in and out.