What's on your bench?

[usmcbuckwild]

Maybe a bad switch on the handle???? Maybe switch is preventing it from starting?

Swapped out the switch already, bypassed it and even removed it all together. Ran new wires as well. Its getting excellent spark

 

[usmcbuckwild]

What color is the spark?

Nice even blue

 

[Bigmac]

It must be out of time, is it even trying it start? Or it’s somehow major flooded?

 

[psuiewalsh]

You positive the case bearings are good? I had an issue on a blower. Passed all tests but would change the spark when running.

 

[psuiewalsh]

Since it is an 800 is there a way to verify the cylinder Reed's are good?

 

[usmcbuckwild]

It must be out of time, is it even trying it start? Or it’s somehow major flooded?

I’m starting to think its flooding.

 

[usmcbuckwild]

You positive the case bearings are good? I had an issue on a blower. Passed all tests but would change the spark when running.

Both bearings are new

 

[beaglebriar]

Both bearings are new

Check the intake boot for tears?? It won't even so much as pop? Have you squirted mix straight down the plug hole? If it doesn't start doing that there's usually something seriously fugged up like a major air leak.

I know you've pretty much covered all the bases here just trying to help. Lol

 

[Glock37]

Just got a new old stock oem 044 screw cap tank

May have to build a 12 mm 044 or hybrid !


Sent from my iPhone using Tapatalk

 

[Duane(Pa)]

Just got a new old stock oem 044 screw cap tank

May have to build a 12 mm 044 or hybrid !


Sent from my iPhone using Tapatalk

You SUCK!

 

[usmcbuckwild]

Check the intake boot for tears?? It won't even so much as pop? Have you squirted mix straight down the plug hole? If it doesn't start doing that there's usually something seriously fugged up like a major air leak.

I know you've pretty much covered all the bases here just trying to help. Lol

I got one little fart out of it when the spark plug was only threaded in about halfway. Now: nothing. I walked away

 

[Glock37]

You SUCK!

Thank You !!!

The guy has about 25 more !!!


Sent from my iPhone using Tapatalk

 

[Bigmac]

Thank You !!!

The guy has about 25 more !!!


Sent from my iPhone using Tapatalk

How much $?

 

[Bigmac]

I got one little fart out of it when the spark plug was only threaded in about halfway. Now: nothing. I walked away

Flip it upside down and crank it over with the plug out to clear the fuel out, let it sit and try again

 

[tickbitintn]

Flip it upside down and crank it over with the plug out to clear the fuel out, let it sit and try again

That's what I was going to say!

If bottom end is flooded it will take forever to dry out without doing this...

Sent from my XT1635-01 using Tapatalk

 

[Glock37]

How much $?

200 plus ship on ebay


Sent from my iPhone using Tapatalk

 

[Bigmac]

200 plus ship on ebay


Sent from my iPhone using Tapatalk

That’s not bad! A flippy cap one is around 150, not bad at all!

 

[Canadian farm boy]

Just got a new old stock oem 044 screw cap tank

May have to build a 12 mm 044 or hybrid !


Sent from my iPhone using Tapatalk

That's awesome Mike. Nice grab.
Gotta ask, what's up with the impulse hose or that the fuel line shoved through the impulse line hole?

 

[usmcbuckwild]

Flip it upside down and crank it over with the plug out to clear the fuel out, let it sit and try again

Already did! Been sitting all evening and will check it out in the morning

 

[Bigmac]

Already did! Been sitting all evening and will check it out in the morning

Great! I hope it works out for you!