What's on your bench?

[tickbitintn]

Sounds like the average tree service saw....

Sent from my XT1635-01 using Tapatalk

 

[Canadian farm boy]

Step 1, remove engine from POS Denali. Done.

 

[tickbitintn]

Today did some landscaping with help from the truck....

Then some digging to expose the root infiltration into the septic...

You don't want any further pics!!!!
Or the smell...

Sent from my XT1635-01 using Tapatalk

 

[PA Dan]

Step 1, remove engine from POS Denali. Done.View attachment 274662View attachment 274663

You're going to need a bigger bench!

 

[av8or3]

Bad things can happen inside airplane engines too. Not sure what caused this, my guess is detonation that could have been cause by an overzealous pilot trying to save a few cents a mile by leaning his mixture too lean of peak. Cylinder looked normal.

 

[Al Smith]

I ran into a snag .By the looks of things on one of those concrete
saws somebody had ham handed the boot clamp and pinched the boot .I could tell right after it came into view because the dang thing is buried under the carb mount thing .I'm not exactly certain how the boot comes out of the holder but suspect it gets stuffed kind of like a Stihl boot . 31 degrees in my garage ,Buna-n doesn't bend so well .
I think I can repair it using o-ring glue .If not I'm only out 12 bucks . The boot part number is 394-131 -210 on both Dolmar and Makita parts lists .Pot lickers get 25 bucks and up for them and I thought Stihl was outrageous .

 

[Al Smith]

That aviation engine piston reminds me of old tractor engines with a double set of oil control rings .Of course a John-Deere A only runs about 800 RPM much thicker rings too ,larger piston .

 

[Czed]

Got my 10.00 amazon carb on my neglected 16 year old 3500 watt

Started first pull
Got this hart tool set for Christmas
It's handy the sizes are engraved not stupidly printed on the sockets to wear off.this thing probably has over a 2000 hour's on it lol

 

[Al Smith]

Just as I thought .That boot did unfold it just needed heated up to be limber enough to bend .A little short visit near my woodstove chugging away full of pop corn dry white oak did the trick .There's always a different way of skinning the same cat .

 

[Al Smith]

I've got I think the same gen set in my shipping box that belongs to my son .I fire it up every so often and have it "Stabiled " so the gas doesn't go funky .I failed to do that on my set which is a 5000 watt and spent some time this fall clearing out fuel lines and the carb . As I fire up the old saws I give them a shot too just in case .

 

[WillG]

Had this come up on my Facebook memories today. Mini gtg with @malk315 @RI Chevy @SOS Ridgerider @huskyboy and his dad at @paragonbuilder place. Fun day.

Sent from my E6910 using Tapatalk

 

[RI Chevy]

Yes!

 

[WillG]

Yes!

Miss being able to do stuff like this. Great group of people too!

Sent from my E6910 using Tapatalk

 

[Wood Chopper]

Had this come up on my Facebook memories today. Mini gtg with @malk315 @RI Chevy @SOS Ridgerider @huskyboy and his dad at @paragonbuilder place. Fun day.

Sent from my E6910 using Tapatalk

@166 can you believe this sheet! No invites. Mean and hurtful.


Sent from my iPhone using Tapatalk

 

[RI Chevy]

No Dolkitas were there. You wouldn't be interested.

 

[Wood Chopper]

May this never let our workbenches be empty.


Sent from my iPhone using Tapatalk

 

[tickbitintn]

May this never let our workbenches be empty.


Sent from my iPhone using Tapatalk

Liquid gold...

Lol

Sent from my XT1635-01 using Tapatalk

 

[RI Chevy]

May this never let our workbenches be empty.


Sent from my iPhone using Tapatalk

Whatcha got there. Some wata in da petrol?

 

[RI Chevy]

The Stihls just eat that stuff right up!

 

[166]

@166 can you believe this sheet! No invites. Mean and hurtful.


Sent from my iPhone using Tapatalk

I was there. Where were you?

Who do you think took the picture