What's on your bench?

[MG porting]

Hey do recall if all three carb bolts are the same length. I can find one of mine and may have to get another.

Sent from my SM-G950W using Tapatalk

I believe one might be a little longer but I haven't had the carb off this one this saw has never been apart other than for cleaning who ever owned this saw took very good care of it.

 

[merc_man]

I believe one might be a little longer but I haven't had the carb off this one this saw has never been apart other than for cleaning who ever owned this saw took very good care of it.

Well i was being lazy lol. I pulled the other one out and its seems to be same length. Had to run to hardware store and thay accually had one just longer so will cut it to length.

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Mini mac 30 is on the bench. Almost back togeather. Now the recoil is broken. I see a vid on you tube hiw to fix so gonna try that tomorrow if i get time.

Sent from my SM-G950W using Tapatalk

 

[460 magnum]

Is the normal color for a 661r with a maxflo. Never see a plug 2 different colors like this the back side of the plug has me a little concerned I seem more white than tan.

 

[460 magnum]

 

[huskihl]

View attachment 195106

Looks normal.
I think the 2 different colors is from the plug electrode facing sideways when it's tightened down

 

[a. palmer jr.]

Not a saw but a Poulan Weed trimmer, owner said it runs on choke but not when you take the choke off...I looked and the "choke" doesn't have a butterfly on the shaft, and no holes for screws to put a plate on the shaft. First one like that I've ever worked on. It runs nonetheless, just needed a carb cleaning.....

 

[460 magnum]

Looks normal.
I think the 2 different colors is from the plug electrode facing sideways when it's tightened down

Thanks man that makes sense

 

[460 magnum]

Looks normal.
I think the 2 different colors is from the plug electrode facing sideways when it's tightened down

Thanks man that makes sense

 

[MG porting]

Looks normal.
I think the 2 different colors is from the plug electrode facing sideways when it's tightened down

Yep exactly plug orientation.

 

[kingOFgEEEks]

Not a saw but a Poulan Weed trimmer, owner said it runs on choke but not when you take the choke off...I looked and the "choke" doesn't have a butterfly on the shaft, and no holes for screws to put a plate on the shaft. First one like that I've ever worked on. It runs nonetheless, just needed a carb cleaning.....

What model? I have a Poulan Pro 333 like that, and it seems to work. Definitely goofy, though.

 

[justoldsaws]

Echo CS8000, *f-wording previous owner had been using sump oil as bar lube.
Drained tank and now I'll need to flush it out a few times, has a sludge in the botton and small metal filings.

 

[bigbadbob]

Bought a beater canoe,, 8 bruises,,,now great for lake.

 

[a. palmer jr.]

What model? I have a Poulan Pro 333 like that, and it seems to work. Definitely goofy, though.

Not sure, the owner already came and got it. It had a kind of bullet shaped power head and the pull starter in the front of it if that helps..

 

[merc_man]

The mini 30 is back togeather and running. Just need to retune the carb. And find a on off switch. Never had one on it.

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Well the mini is backnon the bench. May have to go get another fuel line. Slow leak at the fitting by tank. I shiuld.have used the yellow tygon stuff in the first place but oh well.

Sent from my SM-G950W using Tapatalk

 

[drf256]

Built an 026 for a buddy. It got the full treatment.

Came out pretty nice for a $100 saw in-a-box buy from the TP here.

 

[Johnmn]

Building a jonsered 666!
F....... Pics won't load!

 

[MustangMike]

Sometimes I have to re size them … and experiment to get that to work!

 

[Johnmn]