What's on your bench?

[shadco]

Everyone knows Michigan Sausage is the best.

.

 

[TALLGUY]

Can you sharpen my blade? Note the spindle bearing.

Sent from my SM-G950U using Tapatalk

 

[redlight066]

Here’s to a coworker making YOU look like a professional. This crate motor for a walker mower did not have the motor mount holes tapped. I asked Sam for a little help LOL! He ran over to the lathe and made this jig so I could tap the holes straight. I wouldn’t have got anywhere close without his help. They don’t teach this kind of stuff in culinary school.......

 

[Onan18]

Can you sharpen my blade? Note the spindle bearing.

Sent from my SM-G950U using Tapatalk

John Deere, LA or D Series?

 

[Onan18]

Nothing like coming home from work to a broken water main. This was actually on Monday but I have been waiting to bury it until I am sure it is fixed.

 

[ZukiRyder440]

View attachment 181284

View attachment 181286

Interesting little saws with the two throttle triggers.

Mark

I used to have a pair of those when I was 10 years old. I had one just like yours and an orange one. They both ran but I took them apart for some reason... I was bored. lol

 

[merc_man]

Started out by cleaning my work bench off soni could acually do something.
Then i got the little crapsman out and fired it up.
Next was the hoosky 181. Had a few bad spots oun the kill switch wire that was making it act up.
Then decided to work on MAC D ( d44). Pulled the fuel tank apart and cleaned the mouse nest and crap out. Just have to sharpen the chain and im hooing its about ready for its first run in many years. Gotta love the barn saws lol.
Oh ya. The dam little poulan decided to try and pee on the stihl that was below it. Friggin saws always fightin. Lol

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Well i was gonna wait till tomorrow to try and fire MAC D but couldnt wait. When i got this saw it wasmout of a barn and seized up. I was pretty excited when it would stay running with out squirting fuel in carb. May have to clean the carb yet or just try tuning it a lottle but ran out of time and off to work now.

Sent from my SM-G950W using Tapatalk

 

[ranchdadmike]

View attachment 185897

Nothing like coming home from work to a broken water main. This was actually on Monday but I have been waiting to bury it until I am sure it is fixed.

Shark bite and pex FTW!

 

[Spladle160]

Don't know that I would feel comfortable burying a shark bite fitting.

 

[Dub11]

Well i was gonna wait till tomorrow to try and fire MAC D but couldnt wait. When i got this saw it wasmout of a barn and seized up. I was pretty excited when it would stay running with out squirting fuel in carb. May have to clean the carb yet or just try tuning it a lottle but ran out of time and off to work now.

Sent from my SM-G950W using Tapatalk

Them old Macs sure do sound nice.

 

[VinceGU05]

My mates 661 had a near death experience last weekend. So will be hooking into that tomorrow [emoji16][emoji1360]

Bar and chain still pinned under the tree.

 

[MustangMike]

Hope the case is OK … looks like damage near the oil cap.

 

[Onan18]

Kubota F2690, all this aggravation for a $0.79 O Ring.

 

[tickbitintn]

View attachment 186223
View attachment 186224
View attachment 186225
View attachment 186226
View attachment 186227
Kubota F2690, all this aggravation for a $0.79 O Ring.

I'm betting you replaced both.
[emoji846]

Sent from my XT1635-01 using Tapatalk

 

[merc_man]

Workin on a bar rail closer at work. Shhh lol.

Sent from my SM-G950W using Tapatalk

 

[dustinwilt68]

Building a 395 I recently picked up from the sale section, Shaun was able to weld the stripped holes for me. I will be porting it before it goes to the new owner.ATTACH=full]186246[/ATTACH]

 

[Onan18]

I'm betting you replaced both.
[emoji846]

Sent from my XT1635-01 using Tapatalk

You would be correct.

 

[Wilhelm]

Nudder new Dolkita

View attachment 185757

That's a good looking saw.

You can re-box and ship to Iowa... [emoji16]

Awesome. That'll save me some coin. You can ship it to Croatia when you're done

Hmm, not sure what to say to that . . .

Why is it going to Croatia? They should have them from the makita dealers there...????

They're still fake blondes (teal) in Croatia!

There is no Xtra Sausage in Croatia...

Right on!

We have some good hot mustard, but the sausages have to be shipped from over the pond.

 

[AlfA01]

Wiring up the boat electronics and making a cooler top/seat for the boat.