What's on your bench?

[afleetcommand]

Your bench needs to come wipe mine out to make room for a new one!! Lol

Sent from my XT1635-01 using Tapatalk

Its going to wipe away some dirt & shale and make a completely new bench and set trusses holding up a big cover for HTSS

 

[merc_man]

Couple saws for a cleanup. 038 and husky 353. Blew them off sharpened chain and took rakers down a bit more. Should.be plenty agressive now. Next victom is gonna be shagbark hickory.

Sent from my SM-G950W using Tapatalk

 

[Czed]

Those are pretty tough little motors...
Had it been sunk at some point recently or a complete lack of an oil change? (for years!!!)

Sent from my XT1635-01 using Tapatalk

13 year old boy add 55 gallon barrel of gas
And no maintenance
He rampaged on it for month's
Tough little atv

 

[tickbitintn]

Its going to wipe away some dirt & shale and make a completely new bench and set trusses holding up a big cover for HTSS

Wish I had that to put these trusses up the other day!
Not my new shop either. [emoji3525]

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

Its going to wipe away some dirt & shale and make a completely new bench and set trusses holding up a big cover for HTSS

Wish I had that to put these trusses up the other day!
Not my new shop either. [emoji3525]

Sent from my XT1635-01 using Tapatalk

 

[jjdlc]

Old 281xp I rebuilt and sold last year. The recoil spring had broken, so the guy brought it for a replacement. The guy who I sold it to bought it without a bar, wanted to use one he had. Turns out he had been running a mismatched setup. Yuck.

He decided he wanted a new 20" bar. I asked him if he was sure he didn't want something a bit longer, like a 24", for that Saw. He looked at me and asked me if I thought it would handle a 24"...

Yes, I think it will.

 

[Cut4fun]

Be glad to see this 036 go. Fought me every step of the way.
Then when buttoning up to test and tune in wood. Chain wont go on. I count and it is a freaking 59dl chain for a 60dl bar.
But being I used to run big pins on my 066 etc. I knew how to handle this. Remove rim and put on as a set.
Cutting nice in the ash now.

 

[usmcbuckwild]

I don’t have a bench

 

[dustinwilt68]

Can't like that Buck.

 

[Bigmac]

I don’t have a bench

Start building! Lol

 

[Dub11]

I don’t have a bench

In due time.
And house shop like me.
1st and for most the shop/garage
2nd oh theres a house on the property.

 

[Wilhelm]

I don’t have a bench

Much more room on the floor anyways, and as a plus nothing can fall of the bench.

 

[usmcbuckwild]

In due time.
And house shop like me.
1st and for most the shop/garage
2nd oh theres a house on the property.

That is exactly how I think!

 

[usmcbuckwild]

Much more room on the floor anyways, and as a plus nothing can fall of the bench.

The brother-in-law has a small bench in his garage. I’m going to talk with him about getting some stainless to attach to it so i can use it and not wreck it.

 

[Cut4fun]

066 028 let the trouble shooting begin.

55 parts saw going to part or sell whole. 46mm top looks like new still.

 

[Cut4fun]

Back to the 12 again. Square filed PS3 for chain too.
Bought in 94 new and later gave to dad. Got it back during deer season.

 

[husky362]

My 372 bb I've ran this saw a lot over the years I pulled it apart last year to put a piston in found the plating missing in places this was a 90 doller cylinder around 2006 got my money's worth putting a oem 372 cylinder back on it all stock

 

[460 magnum]

Wish I had that to put these trusses up the other day!
Not my new shop either. [emoji3525]

Sent from my XT1635-01 using Tapatalk

How are the 2x4's contented to the concrete slab? Interested in building me a little work shop/garage one day.

 

[Cut4fun]

How are the 2x4's contented to the concrete slab? Interested in building me a little work shop/garage one day.

Going to WAG this. Betting threaded studs in concrete and then 2x4 bolted down to them.

 

[460 magnum]

Going to WAG this. Betting threaded studs in concrete and then 2x4 bolted down to them.

I was thinking something like that maybe even something like some flat bar with bolts run through and welded.