What's on your bench?

[merc_man]

I had a Poulan with the same muffler and popped out them inserts for the screw and drilled some holes in them.
View attachment 166385

I should also add the first one I did was enlarge the current opening and it made it to louder than need be.

Thats an easy way to do it. May copy that idea

Sent from my SM-G950W using Tapatalk

 

[merc_man]

I had a Poulan with the same muffler and popped out them inserts for the screw and drilled some holes in them.
View attachment 166385

I should also add the first one I did was enlarge the current opening and it made it to louder than need be.

I got er done. Not too much louder but noticeble. I put two in one and three in other. Was goin for 4 but broke the drill bit. Grrr.
I had to really add more fuel on high jet. Almost another 3/4 turn to 1 turn out.
Sons happy. Likes loud stuff lol. But it is still quite a weak little saw. Dont take much to stall the cluch on it. Plus he put his over sized dogs on it. Looks cool i guess lol.

Sent from my SM-G950W using Tapatalk

 

[Dub11]

I got er done. Not too much louder but noticeble. I put two in one and three in other. Was goin for 4 but broke the drill bit. Grrr.
I had to really add more fuel on high jet. Almost another 3/4 turn to 1 turn out.
Sons happy. Likes loud stuff lol. But it is still quite a weak little saw. Dont take much to stall the cluch on it. Plus he put his over sized dogs on it. Looks cool i guess lol.

Sent from my SM-G950W using Tapatalk

Timing advance?

 

[huskyboy]

Time to buy a real saw lol

 

[Czed]

2001 tundra sudden stop rainstorms all day.

 

[Stihl working Hard]

Carb kit fixed it. Runs good. Quite a slow turd for 40cc. My BIL told me to keep it. Was too slow lol. So i gave it to my son. Now he wants me to muff mod it.

Sent from my SM-G950W using Tapatalk

A chip off the old block

 

[Stihl working Hard]

2001 tundra sudden stopView attachment 166493 View attachment 166494 View attachment 166495rainstorms all day.

Well that’s gotta suck Dave nobody hurt I hope

 

[Czed]

Well that’s gotta suck Dave nobody hurt I hope

I was only going about 10 mph no injuries.
Truck landed on my new bf Goodrich ta
Luckily no damage it seems other than the ball joint.
Five year's ago the other side broke as i was stopping.
It's funny toyota had a recall of 2002 and up
Mine's a 2001

 

[redline4]

2001 tundra sudden stopView attachment 166493 View attachment 166494 View attachment 166495rainstorms all day.

Replace that axle seal too. Chances are it took damage as the cv shaft exited.

 

[bigbadbob]

Mounted this rack on my bike its a 1984 9600 kilometers.
You have to fabricate one side as its not made for this bike,
Racks are far a few between. it comes as a flat pack and you have to weld it up.

 

[Johnmn]

Upgrading my sap cooker in the evenings.

 

[Cut4fun]

My old racesaw is now famous. It got a modeling job for Cliff and Rick Helsel.

There is one give away on it to tell it is my old saw.

 

[MG porting]

2001 tundra sudden stopView attachment 166493 View attachment 166494 View attachment 166495rainstorms all day.

That sucks in so many bad ways.

 

[Billy Currie]

T525 arrived from @AlfA01 a few months back and I destroyed it on its first job.

Dan comes to the rescue with the required parts and bonus tiny little dogs.

The intake boot broke, the two part handle, start/stop switch. That’s about it. I was able to reuse all the other parts. Tough little saw; a tremendous amount of force was exerted on that handle and nothing else was damage. Even the sticker beneaf it was perfect.

Day of, after I picked up all the pieces
View attachment 165609

Blue taped the intake to protect it while the wait for parts began.
View attachment 165610

Parts arrived today and I got to it. It looks brand new. Not a mark on it.
View attachment 165611


Tiny little bumper/dogs
View attachment 165612


Parts from @AlfA01
literally no matter what you need; Dan can always find it. He goes out of his way to help others out.
View attachment 165613

Looks like the first saw to come to the house after the old lady had gone on a "you have too many chainsaws" rant.

 

[Billy Currie]

024, belongs to a friend of mine. I am putting a 44mm bore cylinder on it and cleaning it up...a lot of cleaning.

 

[Wilhelm]

View attachment 166636 View attachment 166637 View attachment 166638

024, belongs to a friend of mine. I am putting a 44mm bore cylinder on it and cleaning it up...a lot of cleaning.

Toss it in a bonfire, that goo will burn off clean!

 

[TreeLife]

 

[kingOFgEEEks]

View attachment 166746

Look at the grain on that!

I'll take an ell shaped countertop, 14'-3" on one leg, and 36" on the other.

 

[Definitive Dave]

a mess as usual

 

[Redbull661]

a mess as usual

View attachment 166832

appears to be a bunch of CAD voodoo and witchcraft