What oil is best? and what ratio?

[paragonbuilder]

103 on one and 95-96 on the other.

Crazy thing is I've ran both and they are both super strong!

 

[paragonbuilder]

You getting together anytime soon with RI Chevy? I can put it in his box and save you shipping. Most are going to have to go in medium flat rate boxes at $14 eac

Yeah I can hook up with him. That would be great!

 

[mdavlee]

Yeah I can hook up with him. That would be great!

All the oils are spoken for now.

 

[skidooguy]

Is the echo powerblend the same as shindawa one jake?

 

[junkman]

Looks like saber is this weeks oil ,get well soon red armor.

 

[RI Chevy]

Mike. Ship it with saw, and I will deliver it to Dan. Thanks again.

 

[RI Chevy]

Looks like saber is this weeks oil ,get well soon red armor.

Yeah, but its no good. Not blue. Lol

 

[Keith Gandy]

Looks like saber is this weeks oil ,get well soon red armor.

Lol!! Yo azz hurts!! Ive used both

 

[jake wells]

Is the echo powerblend the same as shindawa one jake?

i would say it is the same oil its even the same color and blended by the same company which is spectrum lubricants in selmer, tn.

 

[PissRev]

Is the echo powerblend the same as shindawa one jake?

Very similar but not the same per the MSDS.

http://www.shindaiwa-usa.com/getatt...d563e66/Shindaiwa-One-2-Cycle-Engine-Oil.aspx

http://www.echo-usa.com/getattachme...ial-Safety-Data-Sheets,-Echo-Power-Blend-2-Cy

 

[PissRev]

Has anyone torn down a saw that exclusively ran Husky XP oil? I can get this oil from my local mom & pop Husky/Scag dealer. They know me by name, have gone out of their way to help me out, and have cut me discounts on a bunch of equipment. I don't mind paying $18 a 6 pack of 2.5gal mix bottles since they have taken care of me. I have used this oil it's a pretty blue color and it has almost no smell. No ratings on it of any kind.

 

[junkman]

Has anyone torn down a saw that exclusively ran Husky XP oil? I can get this oil from my local mom & pop Husky/Scag dealer. They know me by name, have gone out of their way to help me out, and have cut me discounts on a bunch of equipment. I don't mind paying $18 a 6 pack of 2.5gal mix bottles since they have taken care of me. I have used this oil it's a pretty blue color and it has almost no smell. No ratings on it of any kind.

I am running it right now ,i think it burns a little cleaner than the saber does ,and it is easy to get

 

[mdavlee]

I am running it right now ,i think it burns a little cleaner than the saber does ,and it is easy to get

I may try it when I finish the Saber off. I've got enough left for 1 gallon of fuel. Been going back and forth with it and klotz of all kinds.

 

[Adirondackstihl]

I may try it when I finish the Saber off. I've got enough left for 1 gallon of fuel. Been going back and forth with it and klotz of all kinds.

You try the snowmobile techniplate?

 

[mdavlee]

You try the snowmobile techniplate?

No I haven't. I'm going to guess it's close to the klotz lite for rc planes.

 

[Adirondackstihl]

No I haven't. I'm going to guess it's close to the klotz lite for rc planes.

Not sure.
I know it's a bit thinner so it can flow in sub-freezing temps.
Also has rust inhibitors, which from my understanding not all Klotz has.

 

[mdavlee]

Not sure.
I know it's a bit thinner so it can flow in sub-freezing temps.
Also has rust inhibitors, which from my understanding not all Klotz has.

May be the best thing to run in saws.

 

[junkman]

I may try it when I finish the Saber off. I've got enough left for 1 gallon of fuel. Been going back and forth with it and klotz of all kinds.

I have milled about 4 gallons with it so far .power rolls on nice and it cleans up quick ,the 440 likes it also ,does not leave the saber soot in the muffler can .Only dislike is the bottles are for 50 to 1 so i dump them in amsoil bottles to measure the mix .
4o to 1 will spooge a little under light loads,but not as much as saber did ,heavy loads it burns clean .Tuning was close ,maybe 1/8 of a turn off or so ,had to lean it a bit from the saber .

 

[mdavlee]

I have milled about 4 gallons with it so far .power rolls on nice and it cleans up quick ,the 440 likes it also ,does not leave the saber soot in the muffler can .Only dislike is the bottles are for 50 to 1 so i dump them in amsoil bottles to measure the mix .
4o to 1 will spooge a little under light loads,but not as much as saber did ,heavy loads it burns clean .Tuning was close ,maybe 1/8 of a turn off or so ,had to lean it a bit from the saber .

I'll give it a try sometime this winter.

 

[Adirondackstihl]

May be the best thing to run in saws.

I noticed an increase in throttle response in the ZCS 346 & 066