Thinking of selling my 064

[Cracker Boy]

It never ends brother!!
1) I work on saws daily and know whats best
2) I run saws daily and know whats best
3 ) Red Armor is the best oil
4) Any oil works
5) Stihls best
6) Huskies r best
7) Dolamr/Makitas the best
8) Fiskars x27 the best
9) Gransfors Bruks the best
10) 661c is the only saw made
11) 064/66 only saw made
12) etc., etc.
IT NEVER ENDS

Well said no im not upset with anyone.as i said earlier its all in what your confident in and how it feels to you.you forgot ford is best chevy is best dodge is best mercury is best yahmaha is best omc is best susuki is best i here it fishing too and at the races too

 

[Keith Gandy]

Well said no im not upset with anyone.as i said earlier its all in what your confident in and how it feels to you.you forgot ford is best chevy is best dodge is best mercury is best yahmaha is best omc is best susuki is best i here it fishing too and at the races too

Does the list end?? But what it all boils down to is everybody is right in their own sense??!!

 

[sawmikaze]

Hes an arborist has his own tree sevice 2nd generation and a liutinent for the county fire dept and using recue saws there.im just repeating what he said.he says its smooth but aint got the torque as well

I know arborists and service owners who don't know Jack dick about saws..i work for one.

441s make plenty of torque for a 70cc saw.

 

[Keith Gandy]

I know arborists and service owners who don't know Jack dick about saws..i work for one.

441s make plenty of torque for a 70cc saw.

Mine cut well for about 2 weeks then when it got hot it took about 60 pulls to recrank. Shop never fixed it so it was traded

 

[Cracker Boy]

I know arborists and service owners who don't know Jack dick about saws..i work for one.

441s make plenty of torque for a 70cc saw.

I guess its all matter of opinion. And what your used to.and confident in i grew up with this guy his dad was arborist as too. Thats kunda were i started to learn his dad was old school hard ass.this guy used to build and race dirt bikes too.

 

[Cracker Boy]

Mine cut well for about 2 weeks then when it got hot it took about 60 pulls to recrank. Shop never fixed it so it was traded

I hope i didnt make that mistake on a 261c i got 2, 1 c and carb i just built everyone said keep the c model.so i sild the carb model one.this is first m tron time will tell

 

[TreeLife]

An 064 weighs less than 14.7 lbs? Dolmar 7910 would probably give an 064 a run for its money, more comfortably...once again, just my opinion. I had alot of time behind my 7910

 

[TreeLife]

The guy you know obviously has his head up his ass and doesn't know jack *s-word..a well running 441c thats broke in is a badass saw.

Maybe I had a dud? My 441c felt like a dog, it was also completely stock and not mtronic...

 

[Keith Gandy]

I guess its all matter of opinion. And what your used to.and confident in i grew up with this guy his dad was arborist as too. Thats kunda were i

I hope i didnt make that mistake on a 261c i got 2, 1 c and carb i just built everyone said keep the c model.so i sild the carb model one.this is first m tron time will tell

I like mtronics and autotune until its haywire. Everyone Ive had on both brands had some sort of quirkiness

 

[Keith Gandy]

Maybe I had a dud? My 441c felt like a dog, it was also completely stock and not mtronic...

I have a carb model in a box under my shop. Didnt last long in a treeservice but I may build it oneday. Parts saw as of now

 

[TreeLife]

Ifn I was to get a 441c it would be mtronic. But I have 4 70cc class saws, I don't really need another.

 

[Keith Gandy]

An 064 weighs less than 14.7 lbs? Dolmar 7910 would probably give an 064 a run for its money, more comfortably...once again, just my opinion. I had alot of time behind my 7910

The earliest pho 064 is 14.1lbs

 

[Keith Gandy]

My 064 with westcoast setup and fuel/oil and a 28 es light is around 20.5lbs. A 440/460 with same setup is alil over 19lbs

 

[TreeLife]

@Hall84 take your new 064, empty it and toss it on a scale if you have one. I'd love to know what one actually weighs vs advertised weight

 

[MustangMike]

I don't really see any 044/440s anymore, wish I did. The two tree services I deal with mostly run 460/461s as their primary saws, have 660s for the big stuff, and top handles for the little stuff.

Most of the time I work on a 460 or 461. They seem to hold up much better since I started opening the mufflers and removing the carb limiters. The guys like the way they run better also.

 

[MustangMike]

@Hall84 take your new 064, empty it and toss it on a scale if you have one. I'd love to know what one actually weighs vs advertised weight

There were different versions, they will not all be the same. Ditto 044s and 066s.

 

[Cracker Boy]

An 064 weighs less than 14.7 lbs? Dolmar 7910 would probably give an 064 a run for its money, more comfortably...once again, just my opinion. I had alot of time behind my 7910

I agree theyd be close no question but for the weight diff and 5 more cc im goin 064.i was allways taught cant beat cubic inches.

 

[sawmikaze]

I agree theyd be close no question but for the weight diff and 5 more cc im goin 064.i was allways taught cant beat cubic inches.

You are right about cubes.

But I can tell you this much..some of the videos I see guys make for online forums it wouldn't matter what MMWSOPPXBQBR ported saw or whatever it is they run..they would get smoked in effiencey by a guy who knows what he's doing with a stock saw.

 

[blsnelling]

Maybe I had a dud? My 441c felt like a dog, it was also completely stock and not mtronic...

Then it wasn't a 441C. The C is MTronic, which is considerable stronger.

 

[Dub11]

I have a crapsman I took out of a dumpster I cut railroad ties with and roots buried in the ground...i don't even know what model it is because all the decals are gone..that sumnabitch vibrates BAD.

That sounds like a woodshark

I mirror what @sawmikaze and @mdavlee said. Old saws do not compare to modern saws in a WORK environment. I've been trying to sell my 660 for a 661, because it's just on a different level. 064s and 64 hybrids are novelties. I would never use one for 7 hours a day.

I actually use saws for a living, just an idiots opinion...

Logic on a interwebz forum? Pfft

It never ends brother!!
Chainsaws are dumb!
1) I work on saws daily and know whats best
2) I run saws daily and know whats best
3 ) Red Armor is the best oil
4) Any oil works
5) Stihls best
6) Huskies r best
7) Dolamr/Makitas the best
8) Fiskars x27 the best
9) Gransfors Bruks the best
10) 661c is the only saw made
11) 064/66 only saw made
12) etc., etc.
IT NEVER ENDS

Fixed it lol