The Swap Meet Thread

[Mastermind]

Anyone into Husky 357s…I have a new OEM 46mm piston for the 357s with the narrower crank small end.

Swap for a 357/359 carb?

Which carb are you wanting?

 

[oddsaws]

Which carb are you wanting?

Walbro HDA 199 or Zama EL42

 

[Mastermind]

Walbro HDA 199 or Zama EL42

I'll see if I have an extra EL42

 

[oddsaws]

I'll see if I have an extra EL42

Much appreciated

 

[Mastermind]

Much appreciated

I have a HDA199A. I'll see if it's rebuildable. What carb are you replacing?

 

[oddsaws]

I have a HDA199A. I'll see if it's rebuildable. What carb are you replacing?

Looking for these carbs as an upgrade on some 346xp builds I have in the works.

I have seen the HDA199 with the 'A' designation and some that don't so it may be what I am looking for.

 

[Mastermind]

Looking for these carbs as an upgrade on some 346xp builds I have in the works.

I have seen the HDA199 with the 'A' designation and some that don't so it may be what I am looking for.

I've got it cleaned and rebuilt. Should be good to go. Message me with an address.

 

[oddsaws]

I've got it cleaned and rebuilt. Should be good to go. Message me with an address.

Done! Thank you

 

[LAWN BOY]

I need a hand guard for a John Deere 50V

 

[oddsaws]

Up for swaps:

Nice condition Stihl MS661 crankshaft. Pulled from a running saw with a broken dawg mount. No flywheel key.

Looking to swap for another Walbro HDA199 or Zama EL42 or anything that would work on a 357/359. I also like 346xp parts, specialty tools and long walks on the beach.

 

[bpmaas]

SOLD! I have 9 Stihl 404/.063 full chisel chains I want to sell. 3 have 68 drive links with cutter lengths of .410, .400, & .350. 6 have 66 drive links with cutter lengths of .390, .385, 2@ .330, & 2@ .240.
If you have use for these, make an offer. I've got no use for them.

 

[LAWN BOY]

 

[Mastermind]

I have 9 Stihl 404/.063 full chisel chains I want to sell. 3 have 68 drive links with cutter lengths of .410, .400, & .350. 6 have 66 drive links with cutter lengths of .390, .385, 2@ .330, & 2@ .240.
If you have use for these, make an offer. I've got no use for them.View attachment 467932

I ain't keen on pricing someone else's stuff....but I'd be interested if I knew what you wanted for em.

 

[Partner]

I also use them for P100 Super but a bit far away

 

[PA Dan]

Looking for a Dolmar piston for a 5105. Looking for OEM. Have parts, chains, cash... Let me know if you got one.

Thanks,
Dan

 

[Mastermind]

Looking for a Dolmar piston for a 5105. Looking for OEM. Have parts, chains, cash... Let me know if you got one.

Thanks,
Dan

I have a parts saw Dan. I'll get Bubba to pull the muffler and check it out.

 

[redneckhillbilly]

anybody have an old style 026 air filter and air filter cover kicking around?

 

[lehman live edge slab]

anybody have an old style 026 air filter and air filter cover kicking around?

I’ll look what I have, believe I have a complete red lever carcass in a box

 

[oddsaws]

Evening gents. Looking for this rubber part that fits on the Husqvarna 357/359. Part 503964301 - deflector/protector.

 

[Mastermind]

Found it online.

Protector 503964301 - OEM Husqvarna - eReplacementParts.com https://share.google/0XMFQrFMgHzPBx8Hv