The Swap Meet Thread

[lumberjackchef]

Anybody got a cs8000 jug and slug they could part with?

Sent from my Moto E (4) using Tapatalk

 

[Glock37]

Need a good unbroken recoil cover for a stihl 461

Green paper and other stuff to trade


Sent from my iPhone using Tapatalk

 

[MG2186]

Looking for a good 395 coil and starter housing or complete without any spokes broken

 

[00wyk]

Don't spose anyone has an extra 281xp or 288xp top cover they feel they just gotta send to Ireland?

 

[kingOFgEEEks]

Don't spose anyone has an extra 281xp or 288xp top cover they feel they just gotta send to Ireland?

PM me. It might be a little ugly, but I’ve got one or two.

 

[kingOFgEEEks]

PM me. It might be a little ugly, but I’ve got one or two.

My cover was a little too broken, after I dug it out. Let's find this gentleman a good one somewhere.

 

[00wyk]

My cover was a little too broken, after I dug it out. Let's find this gentleman a good one somewhere.

Aww yer far too kind. I should probably disclose the fact that I am asking for a new cover because I made a mess of my own one trying to drill a hole for the decomp. It was so brittle that even with a piece of wood behind it, the cover cracked before the bit was halfway through. This made my bit and my grip slip and the crack grew and made things even uglier. It is usable right now, but I am afraid with all the rain here that it's just gonna cause issues later on since it's a big ugly hole. ANd it's gonna fall apart soon anyways.

 

[cus_deluxe]

I think those covers are cheap from a dealer new, like $30? Maybe one of our fine dealers on the forum could help you out.

 

[ranchdadmike]

Oem is $32 with free ship on amazon

 

[00wyk]

And then there's the cost of sending it here. Well, I'll try and see if the local guys or the UK can sort this out for me. Thanks for the help! Enjoy your turkey daze, everyone!

 

[Dub11]

Aww yer far too kind. I should probably disclose the fact that I am asking for a new cover because I made a mess of my own one trying to drill a hole for the decomp. It was so brittle that even with a piece of wood behind it, the cover cracked before the bit was halfway through. This made my bit and my grip slip and the crack grew and made things even uglier. It is usable right now, but I am afraid with all the rain here that it's just gonna cause issues later on since it's a big ugly hole. ANd it's gonna fall apart soon anyways.

Plastic weld that sucka

 

[00wyk]

I was thinking of actually welding a new plate on to it. I need to get a new bar in a bit, so this is bad timing.

 

[Frank bierce]

Any interest in an ohsixfour case? Crank was shot, and this had a couple epoxy spots on it. Chipped them off to find two holes, each case half, into the oil tank Not sure how holes would have ended up there. Lol
Next issue is a muffler mounting hole. Inserting proper bolt would be the same as throwing a hotdog down a hallway.

Can’t think of anything I need at the moment. Just seeing if anyone would like this.
View attachment 145710 View attachment 145711 View attachment 145712 View attachment 145713 View attachment 145714

@Scotty Overkill

 

[Scotty Overkill]

@Scotty Overkill

I'll take it buddy, and I owe ya one. Once I get this damned forge back up and running (hopefully soon) I'll hook you up with something special.

 

[Stump Shot]

Looking for a used Walbro WT-170-1 from a Husqvarna 51/55/55 Rancher saw, that is suitable to be rebuilt, for the saw I am gifting to the Shemane Wittmer raffle. Have various 268/272 and 281/288 and other oddball saw stuffs for trading fodder.

 

[usmcbuckwild]

Looking for a used Walbro WT-170-1 from a Husqvarna 51/55/55 Rancher saw, that is suitable to be rebuilt, for the saw I am gifting to the Shemane Wittmer raffle. Have various 268/272 and 281/288 and other oddball saw stuffs for trading fodder.

I have a couple 51s and 55s, let me see which carb is on them.

 

[usmcbuckwild]

Looking for a used Walbro WT-170-1 from a Husqvarna 51/55/55 Rancher saw, that is suitable to be rebuilt, for the saw I am gifting to the Shemane Wittmer raffle. Have various 268/272 and 281/288 and other oddball saw stuffs for trading fodder.

 

[usmcbuckwild]

Well, due to a circlip that lost an ear on a fresh build that just got handed off to the customer, I am in need of an MS660 cylinder. I have all sorts of stuff to trade to help reduce $$$$$$ pain.

 

[Frank bierce]

@usmcbuckwild

 

[usmcbuckwild]

@usmcbuckwild
View attachment 152258 View attachment 152259 View attachment 152260 View attachment 152261 View attachment 152262

PM sent!!