The Swap Meet Thread

[Lightning Performance]

They are few and a bit odd. Must be leftovers on mine with the flat top, HD and metal box. Very crappy carb inlet area on mine but lots of material there to smooth it out! It sounds way better than my 660. Decomp jug plugged when it came to me. Weird saw for sure.
Do you have any part numbers? Or IPL part number list for that white tank handle?

 

[MG porting]

ok, I due have an extra orange carb housing piece that screws to the top of the tank - so it doesn't need to be a complete tank

Here's the one I've got unfortunately it's not what you're looking for it's the see thru tank the non see thru is going to be a tuff one to find unfortunately but you may get lucky I'll keep a eye out and check to see if anyone I know who may have one like what you're looking for.

 

[Tractorsaw1]

Thanks

 

[odin]

Looking for an early Stihl 066/064 white fuel tank - I have a see thru tank to fit the same that has a seam repair I would like to trade. I am looking to die it black so need not be perfect, just no cracks, breaks, or massive scratches. I could also use an HD air filter cover & the carb cover plate with the snorkel slot for the same & clutch cover - I have a wj-48 carb & cash I could swap also for those. Thanks

I'm your Huckleberry...

Was hoping for some dinero for this one. Maybe we can work something out. Don't have a lot of time right now, I'll try to PM you this evening.

 

[AlfA01]

Guys, I’m looking for some small parts for SOLO 603. I need fuel cap and oil cap gaskets, or if someone knows what size O-ring that’ll fit.

I’m also looking for the carb adjuster surround grommet/guide.

If anyone knows where I can find these parts, it’s greatly appreciated.

I don’t have much to trade, other than green pieces of paper.

Sondre, do you have any part numbers? I found a dealer here that I can ask.

 

[MG porting]

I'm your Huckleberry...

Was hoping for some dinero for this one. Maybe we can work something out. Don't have a lot of time right now, I'll try to PM you this evening.

If he doesn't want to buy the hole thing I'll be interested in the case and crankshaft and brake system.

 

[odin]

If he doesn't want to buy the hole thing I'll be interested in the case and crankshaft and brake system.

FWIW, the rear AV mount on the PTO side is busted. If you look close you can see it in the pic of the underside. Crank is questionable as well. It's bound up a bit and I haven't bothered to figure out if it's just crud down there or what.

The rest of the see-able parts appear to be good. If that stinking case wasn't knackered, I'd be scrounging really, really hard to get an 064 running myself...

 

[SOS Ridgerider]

Sondre, do you have any part numbers? I found a dealer here that I can ask.

I did manage to find the gaskets on eBay. They’re already installed on the saw. It needed it. The old ones were like plastic.

The grommet is supposedly coming from Germany. I found it on a German site, and ordered it. They don’t ship outside the EU, so it’ll be sent to my address in Norway, and then I’ll have it sent here. Hopefully it’ll work out.

I do appreciate the offer to look up the parts, though, and there may be other things needed in the future. Maybe I can ask you if that happens?

 

[MG porting]

FWIW, the rear AV mount on the PTO side is busted. If you look close you can see it in the pic of the underside. Crank is questionable as well. It's bound up a bit and I haven't bothered to figure out if it's just crud down there or what.

The rest of the see-able parts appear to be good. If that stinking case wasn't knackered, I'd be scrounging really, really hard to get an 064 running myself...

I need all the spare parts that I can get for the 064s just in case something happens with mine it's nice to have some. Lol.

 

[AlfA01]

I did manage to find the gaskets on eBay. They’re already installed on the saw. It needed it. The old ones were like plastic.

The grommet is supposedly coming from Germany. I found it on a German site, and ordered it. They don’t ship outside the EU, so it’ll be sent to my address in Norway, and then I’ll have it sent here. Hopefully it’ll work out.

I do appreciate the offer to look up the parts, though, and there may be other things needed in the future. Maybe I can ask you if that happens?

I'm always here and if there is something odd that you can't get in the US, I can always try on my end.

 

[SOS Ridgerider]

I'm always here and if there is something odd that you can't get in the US, I can always try on my end.

Awesome!! Thank you!

 

[isaaccarlson]

Looking for husky 350 clutch assembly

 

[GoBigBlue1984]

Looking to buy or trade for a 357/359 muffler.

 

[Onan18]

Looking to buy or trade for a 357/359 muffler.

If you don't mind it being a CAT muffler I think I have a pretty nice one. Free 95.

 

[GoBigBlue1984]

That sounds great Joe. I’ll shoot you a message.

 

[Likesaws]

Wanted a oil pump for a Stihl 044. Does not have to work need one to set bearing depth. Let me know.
Thanks

 

[Tractorsaw1]

Rod hooked me up on a tank - Still looking for: 066 poly flywheel coil & wires if decent, flat top HD air filter cover & carb plate with compensator slot - if you have arctic parts I am looking for those also. Lots to trade & $$$$ thanks

 

[SOS Ridgerider]

Looking for a flywheel for a 64xx-79xx for the burgundy 13,500 coil.

 

[paragonbuilder]

Looking for a flywheel for a 64xx-79xx for the the 13,500 coil.

Are the flywheels different?

 

[SOS Ridgerider]

Are the flywheels different?

From what I can read the saws with the burgundy looking coil needs a specific flywheel. This one has that coil. I could be wrong, though. Wouldn’t be the first time. Lol