STIHL The Official Stihl Chainsaws Thread

[SawAddictedFarmer]

I got a proline carb for one I had and it worked great.

Proline® Carburetor For Stihl 024, 024AV, 024S, 026, MS260 Walbro WT-1

Proline® carburetor for Stihl 024, 024AV, 024S, 026, MS260 chainsaws. Please match you part with ours for proper fitment; actual pictures shown. Includes: Carburetor Replaces Stihl OEM #: 1121 120 0611, 11211200611 Replaces Walbro: WT-194 WT-194-1 WT-22 Suitable for the following applications...

sawzillaparts.com

 

[SawAddictedFarmer]

I've got a 194 that's assumed to be good, it needs rebuilding. If you're interested shoot me a offer and I forward that to the guy who technically owns it. I think I have a seal kit to go with it (aftermarket).

 

[Sloughfoot]

I've got a 194 that's assumed to be good, it needs rebuilding. If you're interested shoot me a offer and I forward that to the guy who technically owns it. I think I have a seal kit to go with it (aftermarket).

Proline is what I have. The seal kit same thing as a rebuild kit? Diaphragms, gaskets, metering mechanism, screens............

 

[Sloughfoot]

.

 

[SawAddictedFarmer]

Proline is what I have. The seal kit same thing as a rebuild kit? Diaphragms, gaskets, metering mechanism, screens............

Yes. Rebuild kit.

 

[lehman live edge slab]

Proline is what I have. The seal kit same thing as a rebuild kit? Diaphragms, gaskets, metering mechanism, screens............

I’ve had crap luck with all the aftermarket carbs. Seems like 1 in 8-10 actually tunes right 1 in 3-4 kinda works. I’ve had the jets gall up on 3-4 retune and not be able to turn them anymore. I’d much rather pay 100$ for a new wt 194 than beat my head against the wall on a cheap clone carb. I actually just went through a real 194t on an 026 yesterday, wouldn’t tune right but had been rebuilt by local Stihl shop. I’ve never quite known why a carb will let the saw run with the low speed shut like this one and a few others have. But after clean the whole carb in the ultrasonic with the Welch plugs removed, putting in new needle, setting metering lever properly and changing out the brass check valve the carb now acts perfectly when tuning it. So even though I don’t know exactly want was going on 100% it works well now.

 

[justoldsaws]

New saw for my collection, a 066 redlight, I have wanted one for some time.

 

[singinwoodwackr]

New saw for my collection, a 066 redlight, I have wanted one for some time.

View attachment 473461View attachment 473462View attachment 473463

Looks like it won't need too much work, nice find

 

[lehman live edge slab]

New saw for my collection, a 066 redlight, I have wanted one for some time.

View attachment 473461View attachment 473462View attachment 473463

I have one also, bad thing is coils are notorious for failing

 

[jacktheripper]

I have one also, bad thing is coils are notorious for failing

You can just use a regular “everything” type Stihl unlimited coil in its place. Just make a little metal bracket for the dogleg mount. Only problem is then the light won’t work…

 

[singinwoodwackr]

Everyone should have at least 1 066 re flat top, no decomp
Stihl have the receipt for my ‘92.