DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[oddsaws]

Got a nice condition Sachs-Dolmar 114 that I’d like to refresh. I can already see finding parts is challenging. Fortunately most of the parts are in good shape sans a few foam pieces.

Is there any fuel line mods or other part numbers that would work on this series (112/114/117/120)? I was looking at the possibly using a line from a PS-341 but can’t verify the grommet dimension. Hole on the 114 tank is about 13mm.

 

[Partner]

@stary_pan_henry
Ask this man

Got a nice condition Sachs-Dolmar 114 that I’d like to refresh. I can already see finding parts is challenging. Fortunately most of the parts are in good shape sans a few foam pieces.

Is there any fuel line mods or other part numbers that would work on this series (112/114/117/120)? I was looking at the possibly using a line from a PS-341 but can’t verify the grommet dimension. Hole on the 114 tank is about 13mm.

@stary_pan_henry
Ask this man

 

[Shane¹]

Got a nice condition Sachs-Dolmar 114 that I’d like to refresh. I can already see finding parts is challenging. Fortunately most of the parts are in good shape sans a few foam pieces.

Is there any fuel line mods or other part numbers that would work on this series (112/114/117/120)? I was looking at the possibly using a line from a PS-341 but can’t verify the grommet dimension. Hole on the 114 tank is about 13mm.

You need one of these then it is just regular fuel line

 

[oddsaws]

You need one of these then it is just regular fuel line View attachment 475333

Yes sir the one I have on the saw has shrunken and doesn’t fit the hole snug. I thought about putting an o-ring on it.

Haven’t come across one in my online searches so far.

Also had the idea of using a 2 hole rubber grommet if I could find the size

 

[Shane¹]

Yes sir the one I have on the saw has shrunken and doesn’t fit the hole snug. I thought about putting an o-ring on it.

Haven’t come across one in my online searches so far.

Also had the idea of using a 2 hole rubber grommet if I could find the size

You could wrap a piece of Teflon tape around it I have done that on fuel lines before. I have also put a dab of super glue on them before. I probably have some of those let me look and see if I have one that is better.

 

[Shane¹]

@oddsaws is your tank metal or plastic?

 

[oddsaws]

@oddsaws is your tank metal or plastic?

It’s metal

 

[oddsaws]

Going to take a chance on this one https://chainsawr.com/products/dolmar-chainsaw-valve-fitting-965-451-520-new-d-20

The parts list I have has part number 965 451 621

 

[Shane¹]

That definitely looks like it to me