DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[mettee]

I need to put this in here, almost forgot.

 

[Wilhelm]

@Wilhelm

Was it you who could get Dolmar stickers? I'd like to get one of the round PS7300 stickers for the pull start. It might be some one else.

eta: looks like it's AJs

I need to put this in here, almost forgot. Ugly bar, is ugly.

I can get You a sticker, no problem - but You wouldn't want me to.
For a single sticker shipping costs to me from Germany are the same as for a whole chainsaw.

Luckily for You I own a Dolmar PS-7300 myself and I have secured spare stickers for all my saws!
If all You need is one sticker I am willing to pass on my spare to You.

Just so You know, those silver/ black starter assembly stickers are NLA, they got replaced with the white rubber ones.

I have posted pictures of Dolmar stickers somewhere, I will repost them once I am on my desktop PC.

I am certain that @ajschainsaws can get You stickers, possibly @fordf150 and @166 - they are Dolmar dealers, I am not (I am just a Dolmar nutcase).

Lovely Dolmar PS-7300!
Unless You intend to port her do not convert her to 79cc - the 73's are much better performers than they are being credited for.
I bucked about 7 cubic meters of oak firewood logs yesterday. I had all my large girls with me, my PS-6400 and PS-7900 never left my cars trunk.
My PS-7300 and PS-7310 are stout, my PS-7300 is a high revving beast being tuned a little on the lean side.

 

[mettee]

I fixed my lame pic with a better one ^

I don't want to take your only sticker, how many do you have? Only if you have extra.

I'm turning into a Dolmar nutcase

 

[Wilhelm]

I fixed my lame pic with a better one ^

I don't want to take your only sticker, how many do you have? Only if you have extra.

I'm turning into a Dolmar nutcase

I keep at least 5 (five) stickers for any and all of my saws with the exception of my Sachs-Dolmar saws as those stickers can not be had OEM anymore.

That been said, I have spare spares and can pass on one for a fellow forum member and hopefully future all out Dolmar nutcase!

This is the current Dolmar PS-7300 starter assembly sticker.


The original sticker versions, which I personally like much more visually, are unfortunately obsolete and NLA.
They looked like these:

I like the more embossed "Dolmar" writing on those and they match the clutch cover sticker!

 

[Wilhelm]

I need to put this in here, almost forgot.

Even the pooch is getting a hard-on being so close to that sexy Dolmar . . .

P.S./Edit:
Good dog, has great taste!

 

[Wilhelm]

I need to put this in here, almost forgot.

The Dolmar PS-7300 has enough grunt to pull a bar that length with full complement chain!

If You are utilizing semi skip due to personal preference, that's Your choice and fine.

Dolmar PS-7310 & 36" B&C in oak


Dolmar PS-7310 & 36" B&C fully buried noodling beech

 

[mettee]

The Dolmar PS-7300 has enough grunt to pull a bar that length with full complement chain!

If You are utilizing semi skip due to personal preference, that's Your choice and fine.

Dolmar PS-7310 & 36" B&C in oak
View attachment 146448 View attachment 146449

Dolmar PS-7310 & 36" B&C fully buried noodling beech
View attachment 146450 View attachment 146451

It's all @radio had. I got semi skip and full skip. He is a great guy to deal with and I rather support forum members. It's Oregon 72CJ and what ever the semi skip is I can't remember. I'm going to try a few other chains, but I mostly have pine here, a few cottonwood, and some oak. Other stuff grows here but that is mostly what I cut.

 

[mettee]

I keep at least 5 (five) stickers for any and all of my saws with the exception of my Sachs-Dolmar saws as those stickers can not be had OEM anymore.

That been said, I have spare spares and can pass on one for a fellow forum member and hopefully future all out Dolmar nutcase!

This is the current Dolmar PS-7300 starter assembly sticker.
View attachment 146440

The original sticker versions, which I personally like much more visually, are unfortunately obsolete and NLA.
They looked like these:
View attachment 146441 View attachment 146442
I like the more embossed "Dolmar" writing on those and they match the clutch cover sticker!
View attachment 146445 View attachment 146447

I need to get a sticker to cover and protect my new sticker, Hahahaha. I don't want to mess it up

 

[Wilhelm]

I need to get a sticker to cover and protect my new sticker, Hahahaha. I don't want to mess it up

Are You getting the sticker locally or would You like me to check shipping at my post office.
I only have rates for small packages, a sticker will do fine in an envelope.

The starter assembly sticker isn't easily damaged by normal usage, the clutch cover sticker tends to get torn when flush cutting stumps (without a full wrap).

 

[mettee]

I dont have anyone locally to supply a sticker. I could call Nate and see if he has any. I don't really have any knowledge of other sources.

Which sticker do you have Wilhelm? The rubber one or the older version? I suppose it would fit a single envelope. Let me know cost if you don't mind.

 

[RI Chevy]

@Millermodsaws
@166

2 Dolkita dealers.

 

[huskyboy]

Speaking of stickers, the “rubber” one looks great on these saws.

 

[mettee]

I think Im gonna change the bucking spikes I am not a fan of this version for some reason.

 

[huskyboy]

I think Im gonna change the bucking spikes I am not a fan of this version for some reason.

The older 3 point ones are my favorite spikes I’ve tried on any saw.

 

[Wilhelm]

I dont have anyone locally to supply a sticker. I could call Nate and see if he has any. I don't really have any knowledge of other sources.

Which sticker do you have Wilhelm? The rubber one or the older version? I suppose it would fit a single envelope. Let me know cost if you don't mind.

I have and can get only the rubber stickers, the older version stickers are NLA!
I'll figure out envelope shipping cost and we can go from there.

I think Im gonna change the bucking spikes I am not a fan of this version for some reason.

Are You interested to trade for a set of small EU spikes?
Just asking as I happen to like the US style 1 Star Trek spikes the most.

If You want the large spikes any Dolmar/Makita dealer can get them for You.

 

[Wilhelm]

@Millermodsaws
@166

2 Dolkita dealers.

@Miller Mod Saws (fixed )

&

@fordf150
@ajschainsaws

 

[huskyboy]

The star trek ones are awesome because they are large enough to stick in big wood/bark, protect the muffler and yet they don’t stall the saw as easily as some “west coast” spikes on some other saws. The newly acquired 6421 I have here has the new large dawgs, they look cool... but I ain’t so sure if I’m gonna like em. I guess I’ll find out.

 

[RI Chevy]

The older 3 point ones are my favorite spikes I’ve tried on any saw.

Pics?
Of both please.

 

[Wilhelm]

 

[huskyboy]

Pics?

3 point old style