The giveaway thread 20/21/22/23/24/25

[ammoaddict]

@ammoaddict , sorry you missed the saw and I hope you get well soon.

@Steve , I will work on getting the saw shipped out next week and keep you posted.
Be nice to see the saw put back to work. Must have been scored before I got it.

Thank you for the well wishes.

 

[ammoaddict]

I’m sending him one it needs a top cover and clutch cover probably top end. It was just a parts saw. If someone has these parts they would be appreciated.

Thanks, yes I could use some parts. I just have a few odd and end parts. I don't have anything that the parts saw is missing. I do have an aftermarket cylinder I could put on it if I can't find an OEM one.

 

[ammoaddict]

I can use the 55 gaskets and seals if ammoaddict does not need them.
I've noticed some cyl. gaskets are thicker than others.

If he and I could team up, we'd rule the world with clapped out 55 parts.

I did ask for the gaskets. I like the 50 series saws because I am familiar with them. I like getting them for the volunteers because they are good saws and it's good because I can interchange parts if one claps out.

 

[ammoaddict]

I am proud to be a member of this forum. With all the bad stuff going on everywhere I am glad I can come here and associate with great folks like all of you. Thank you for letting me be a part of it.

 

[Stump Shot]

I'll toss the two Homie-branded bars in the mix, free if you cover shipping. N.O.S. straight from True Value's back room. The GB and Windsor I am planning on keeping.
View attachment 358937 View attachment 358934 View attachment 358935 View attachment 358936

Would one of those fit a Super Minnie?

 

[Woodslasher]

Would one of those fit a Super Minnie?

I'm afraid I dunno, shiny bar is A061 mount, painted one appears to be K095 mount.

 

[Gullet]

I'll toss the two Homie-branded bars in the mix, free if you cover shipping. N.O.S. straight from True Value's back room. The GB and Windsor I am planning on keeping.
View attachment 358937 View attachment 358934 View attachment 358935 View attachment 358936

How much for the sox Dan?

 

[5155]

Sorry about that AA, I got lost in the back and forth.
Think I need to order again anyways. More impulse pipes as usual lol.
Get healed up man.

 

[Woodslasher]

How much for the sox Dan?

My prized tootsie warmers are not for sale, thank you very much!

 

[Czed]

I thought it had a top cover, but don't see it in the box. I'll look around and see if I find it.

This was picked up from a hardware store. There was a problem with the saw. They condemned it under warranty and the tag was sent back to get reimbursed.

If you want it pm your address and I'll send it your way.


Steven

View attachment 358805 View attachment 358807 View attachment 358808 View attachment 358809

Sorry I missed your post
I found him one thanks anyway
I'll never work on this series again
Nothing good comes from it.

 

[Stevetheboatguy]

Any of you fappers or fine gents be able to use these? I've been pulling a few off outboards we scrap. I have more than I should ever need. Fuel filter/water trap assy.



Steven

 

[farminkarman]

Any of you fappers or fine gents be able to use these? I've been pulling a few off outboards we scrap. I have more than I should ever need. Fuel filter/water trap assy.

View attachment 365587

Steven

@dall probably could use some for his huskies

 

[nbbt]

@USMC615 re: USMC615 SAE/METRIC/TORX T-HANDLE WRENCH SETS. Thanks again, I am using these fairly regularly these days. The long reach torx get used a lot. Enuf so that I ordered up a 2nd Torx set the other day for use on my second bench. Overall they are holding up very well. nbb_ now nbbt.

 

[USMC615]

@USMC615 re: USMC615 SAE/METRIC/TORX T-HANDLE WRENCH SETS. Thanks again, I am using these fairly regularly these days. The long reach torx get used a lot. Enuf so that I ordered up a 2nd Torx set the other day for use on my second bench. Overall they are holding up very well. nbb_ now nbbt.

Good to hear they’re still put to use and holding up for you.

 

[vrex]

I bought a spike for a 2511 from Joe. After 1.5 weeks of USPS finding and losing the thing in tracking, Joe was kind enough to send me a new set. Sure enough, eventually the original order showed up, but i needed a set for my work saw, that 2511 does a ton better with a proper spike. So, free to a good home, just cover the shipping. And if you want to send @Red97 some beer money, by all means, he deserves. Stand up guy.

 

[davidwyby]

I’ll buy it

 

[davidwyby]

I bought a spike for a 2511 from Joe. After 1.5 weeks of USPS finding and losing the thing in tracking, Joe was kind enough to send me a new set. Sure enough, eventually the original order showed up, but i needed a set for my work saw, that 2511 does a ton better with a proper spike. So, free to a good home, just cover the shipping. And if you want to send @Red97 some beer money, by all means, he deserves. Stand up guy.

@Red97 PM me please

 

[Woodslasher]

I re-organized my storage shelves a few days ago and found some stuff I don't need, everything's free if you'll pay the shipping. If you have any questions ask away and I'll do my best to answer them. If multiple parts are shown in a picture that is considered a "lot" and will not be broken up, unless there are extenuating circumstances.

 

[Woodslasher]

The Mac parts can be broken up, the recoil half and cylinder base are N.O.S. parts for large frame Macs (1-4*, 1-5*, etc), the handle brace is a good used part for the same saws. The cylinder is a clean bore repainted 10-10 cylinder that either needs a really big plug insert or to be welded up and re-tapped. The 2nd pic is a 562 big dawg kit with the roller catcher, etc. #3 is a Stihl weedeater air filter p/n #4180 141-0300, supposedly fits a FS91. #4 is a 572 clutch cover, it has the captured bar nuts and will also fit a 372/390, etc. #5 is a Husqvarna big outer dog for the same 572/365/372/390 family. (Edit: #2, 4 and 5 are spoken for)

 

[Woodslasher]

First pic is some 066 trigger bits, a chain catcher, a stock outer dog, and a muffler cover. #2 is a stock Husky 346/350 clutch cover, I think I can come up with a matching tensioner too if you need one.
Edit: 066 stuff is spoken for. And the clutch cover too.