WANTED Stihl MS 361 Shroud decompression plug

[jmester]

I am looking for the rubber plug that goes into the cylinder shroud on a ms341 or 361 once the decompression valve is removed. Part number 1135 084 7100. The ipl says it comes in the grommet kit part number 1135 007 1003, but I am not sure that is correct. Local dealer says NLA. The plug is number 7 in the picture.

 

[hacskaroly]

Fill the hole with JB Weld, it will be just the same, but better!

 

[jmester]

Maybe that would work. But the install time is to long. Plug and play would be faster

 

[jmester]

Set amortizera Stihl 1135 007 1003 Stihl MS361 | Agromehanika Alati

agromehanikaalati.com

@Wilhelm

 

[Wilhelm]

Set amortizera Stihl 1135 007 1003 Stihl MS361 | Agromehanika Alati

agromehanikaalati.com

@Wilhelm

Hi Jason

Do You need that?

 

[jmester]

Would you have time to check on it and see if they actually have it? It appears that it has what I am looking for. It's the piece on the bottom of the picture on the left.

 

[Wilhelm]

Would you have time to check on it and see if they actually have it? It appears that it has what I am looking for. It's the piece on the bottom of the picture on the left.

That is in Bosnia, neighboring country.
They advertise sales of aftermarket products.

Is it OK if I check for OEM locally first?

 

[jmester]

That is fine. Are you going to check both part numbers? I have a 1135 007 1003 kit here and it does not have the decompression valve plug in it.
Thank you

 

[Wilhelm]

That is fine. Are you going to check both part numbers? I have a 1135 007 1003 kit here and it does not have the decompression valve plug in it.
Thank you

What is the part number You actually need?
If it is sold as a standalone part.

Maybe I missed it, too hot to think, just beginning to ease up a little.

 

[stihl #1]

I looked in my box of 361 spares and I think this is the plug you want.

Send me your address in a private message and I will mail it to you. Just the plug, not the whole shroud!

 

[jmester]

1135 084 7100
@Wilhelm

 

[jmester]

@stihl #1
Yes that is the plug I need.
Pm inbound